CAP AS 2590828 - Caterpillar

2. Remove two screws (2) in the rear of the frame on the sliding glass panel. Remove the rear frame (1) and the seal. The fixed panel of glass is removed by the same method, except the screws for removal and installation of the rear frame section are on the outside of the main frame. 3. Slide the glass and seal (3) out of the sliding panel.Assemble Rear Window
1. Slide the glass and seal (1) into the sliding panel. 2. Install the seal, rear section (2) of frame and the two screws.3. Install the rear window in the cab. See INSTALL CAB WINDOW GLASS for the procedure to install the rear window.