CAP AS-DUST 2850612 - Caterpillar

Installation Procedure
Table 1
Required Tools    
Tool     Part Number     Part Description     Qty    
A     2P-8250     Strap Wrench Assembly     1    
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g00497250
Typical exampleNote: Before assembly, check the condition of the O-ring seals. If the O-ring seals are worn or damaged, use new parts for replacement.
Ensure that the O-ring seals are in position on the engine oil filter base. Put oil filter base (5) in position on the engine oil cooler and the cylinder block.
Install bolts (6) that hold the engine oil filter base to the engine oil cooler.
Install nuts (3) that hold the engine oil filter base to the engine oil cooler.
Connect turbocharger oil line (4) .
Illustration 2 g00497217
Typical example
Install plug (1) .
Use Tool (A) to install oil filter (2) .
Check the engine oil level.