CAP-VALVE 2894921 - Caterpillar

(1) Torque for bolts ... 530 69 N m (390 50 lb ft) Quantity ... 16Apply 9S3263 Thread Lock on threads(2) Apply 1U8846 Gasket Maker on the mating surfaces of the cover and housing.Apply 5P3931 Anti-Seize Compound on surfaces where pin (3) and bearings (4) come in contact. Bearings (4) preload adjustment procedure:1. Put a load "P" of 4000 kg (8820 lb) on bearing (4).2. Rotate housing (10) to seat the bearing.3. Reduce load "P" to 1000 100 kg (2200 220 lb).4. Measure dimension B.5. Measure dimension (C) of gear (8).6. Use a maximum of two shims (9), to obtain a total shim thickness of ... (A - B) 0.05 mm (.002 in).Shim (9) thickness: 0961773 ... 0.15 mm (.006 in)0961774 ... 0.30 mm (.012 in)0961775 ... 0.40 mm (.016 in) 0961776 ... 0.50 mm (.020 in)0961777 ... 0.60 mm (.024 in)0961778 ... 0.70 mm (.028 in)0961779 ... 0.80 mm (.031 in)0961780 ... 1.00 mm (.039 in)0961781 ... 1.60 mm (.063 in)7. If two shims are used, the thinner one should be placed next to gear (8).(5) O-rings of floating seal and all surfaces in contact with them must be clean and dry at assembly. Put a thin layer of oil on the surfaces that make contact on the metal seals just before installation. (6) Make stake marks near opening of each pin hole after installation, as indicated in VIEW A.(7) Torque for bolts ... 270 39 N m (200 29 lb ft) Quantity ... 16Apply 9S3263 Thread Lock on threads.