CAP 2B3297 - Caterpillar

[2].[3]The following is shown in the character display when pressing menu code 2.3: The bark parameters are used for calculating the thickness of the bark for the different species. For each species, 2 parameters are specified, X and Y, respectively.Y is a fixed variableX is a variable that is affected by the diameter.The calculation formula used is:Bark thickness = Y + (X * current diameter)The parameters can be selected according to those listed for the various bark type areas in VMR 1/95. See appendix 2 for bark functions.The cursor is positioned behind the first parameter. Enter the value that applies for the bark type area that corresponds to the felling area and press ENTER. Alternatively, press ENTER to move to the next value.End the entry by pressing ESC. You will return to menu code 2.This function is activated through parameters under Machine Variables, section 4.1.