CAP SCREW 2B9125 - Caterpillar

1. Remove washer bag (1).2. Remove three covers (2).3. Remove foot support (3). 4. Disconnect oil lines (6) from valve.5. Remove three bolts (5) from the valve, and four bolts (4) from the support assembly. 6. Remove bucket and boom pilot control valve (7). 7. Remove the two cotter pins and pins (8).8. Remove support assembly (9) from the pilot control valve.Install Bucket And Boom Pilot Control Valve
1. Put support assembly (3) in position on the pilot control valve. Install two pins (2) and cotter pins (1). 2. Put bucket and boom pilot control valve (4) in position. 3. Install four bolts (5) in the support assembly. Install three bolts (6) that hold the pilot control valve to the bracket.4. Connect oil lines (7) to the valve. 5. Install foot support (9).7. Install the washer bag.