CAP 2J6310 - Caterpillar

Removal Procedure
Illustration 1 g02175585
The fuel manifold is located on the Clean Emissions Module.
Illustration 2 g02175586
Note: Cleanliness is an important factor. Before the disassembly procedure, the exterior of the component should be thoroughly cleaned. This action will help to prevent dirt from entering the internal mechanism.
Remove nut (6) , washer (5) , and solenoid (4) from valve assembly (1) .
Remove cartridge assembly (3) and remove O-ring seals (2) .Installation Procedure
Install the solenoid valve (1) in the reverse order.
Tighten cartridge assembly (3) to a torque of 50 5 N m (37 4 lb ft).
Tighten the nut (6) to a torque of 20 2.5 N m (177 22 lb in).