CAP AS. 3069431 - Caterpillar

Use this procedure to troubleshoot a problem with the battery.
Table 1
Troubleshooting Test Steps Values Results
1. Check the Battery
A. Verify that the battery is no longer able to hold a charge. Refer to Testing and Adjusting, "Battery - Test" for additional information.
Battery
Result: The battery is OK.
Proceed to Test Step 2.
Result: The battery is NOT OK.
Repair: Replace the battery. Refer to Disassembly and Assembly for the correct procedure.
If the problem is not resolved, proceed to Test Step 2.
2. Check the Switched Battery Circuit
A. Verify that a switched battery circuit drained the battery by being left in the ON position.
Switched Battery Circuit
Result: The switched battery circuit drained the battery by being left in the ON position.
Repair: Charge the battery. Verify that the battery is able to maintain a charge. Refer to Testing and Adjusting, "Battery - Test" for additional information.
Verify that the repair eliminated the problem.
If the procedure did not correct the issue, contact your Cat dealer Technical Communicator (TC). For further assistance, your TC can confer with the Dealer Solutions Network (DSN).