CAP GP-FUEL FILLER 3421260 - Caterpillar

3421260 CAP GP-FUEL FILLER Caterpillar parts

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA3421260
342-1260
3421260

Weight: 2 pounds 1 kg.

Buy CAP GP-FUEL FILLER 3421260 Caterpillar genuine, new aftermarket tractor parts with delivery

Compare Prices: .

As an associate, we earn commssions on qualifying purchases through the links below

Makita Bluemak 30T Mitre Circular Saw Blade, 21.6 cm Diameter x 30 Bore

$66.67

15 Nov 2024
1.0097[0.45] pounds
AU: World Wide Tool

Makita Bluemak 30T Mitre Circular Saw Blade, 21.6 cm Diameter x 30 Bore
Makita Fully hardened and tensioned blades absorb impact and remain flat and true || High grade tungsten carbide with low wear rate for extended blade life || Precision honed for a sharper, longer, lasting edge || Thin kerf for less waste and reduced feed pressure || BlueMak coating resists "pitch" build up, eliminates corrosion and prevents friction

Number on catalog scheme: 3

Caterpillar 3421260 Parts scheme CAP GP-FUEL FILLER

For full view, you need register

Information:

Removal Procedure
Table 1
Required Tools
Tools Part Number Part Description Qty
A 174-9468 Spanner Wrench 1
B 174-9465 Spanner Wrench 1 Start By:
Release the hydraulic system pressure.
Remove the stick. Refer to Disassembly and Assembly, "Stick - Remove".
Personal injury can result from hydraulic oil pressure and hot oil.Hydraulic oil pressure can remain in the hydraulic system after the engine has been stopped. Serious injury can be caused if this pressure is not released before any service is done on the hydraulic system.Make sure all of the attachments have been lowered, oil is cool before removing any components or lines. Remove the oil filler cap only when the engine is stopped, and the filler cap is cool enough to touch with your bare hand.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Note: Put identification on all lines, on all hoses, on all wires, and on all tubes for installation purposes. Plug all lines, all hoses, and all tubes. This procedure helps to prevent fluid loss and this procedure helps to keep contaminants from entering the system.
Illustration 1 g00627140
Disconnect eight hydraulic hoses (1) .
Use Tooling (A) to remove spanner nut (2) from the pin.
Use Tooling (B) to remove spanner nut (3) from the pin.
Illustration 2 g02149864
Attach a hoist and suitable lifting slings to the boom.
Illustration 3 g00627180
Secure boom cylinder (6) to the pillar.
Remove two pins (4) and (5) .
Remove the boom from the pillar. The weight of the boom is 325 kg (715 lb).Installation Procedure
Install the boom in the reverse order of the removal.