CAP AS 3574707 - Caterpillar

Illustration 1 g03643218
Table 1
Specification for 351-9361 Tilt Cylinder Gp    
Item     Qty     Part     Specification Description    
1     1     114-0757 Bushing     Outside diameter is
105.148 0.032 mm (4.1397 0.0013 inch).
Thickness is
2.475 0.025 mm (0.0974 0.0010 inch).    
2     1     170-9847 Buffer Seal     Lubricate lightly with lubricant that is being sealed.    
3     1     216-0005 U-Cup Seal     Lubricate lightly with lubricant that is being sealed.    
4     1     165-9289 Lip Type Seal     Lubricate lightly with lubricant that is being sealed.    
5     -     -     Before assembly, apply green Loctite Retaining Compound 620 to the wiper seal groove.    
6     2     191-5604 Ring     Lubricate inside diameter and out side diameter with clean grease.    
7     1     9X-3607 Seal As     Lubricate inside diameter and out side diameter with clean grease.    
8     1     191-5605 Ring     Lubricate inside diameter and out side diameter with clean grease.    
A     1     355-7738 Tilt Cylinder As     Bore is
170.00 0.10 mm (6.693 0.004 inch).    
B     1     355-7733 Rod As     Diameter is
99.930 0.038 mm (3.9342 0.0015 inch).    
C     1     355-7737 Head     Bore over two lands is
100.63 0.03 mm (3.962 0.001 inch).    
9     2     1V-8242 Bushing     Bore is
89.185 0.020 mm (3.5112 0.0008 inch).    
Installation depth is
10.0 0.5 mm (0.39 0.02 inch).
10     1     7Y-4695 Locknut     Before assembly, lubricate the face and threads with clean oil.    
Torque to
7900 790 N m (5827 583 lb ft).
11     8     7Y-5215 Bolt     Torque to
900 100 N m (664 74 lb ft).