CAP AS 3953298 - Caterpillar

Illustration 1 g03589942
(1) Engine Speed Dial Indicator
(2) Fuel Level Gauge
(3) Coolant Temperature Gauge
(4) Hydraulic Oil Temperature
(5) Action Alarm The monitoring system displays various warnings and information about the condition of the machine. In default mode, the monitor displays 3 gauges and engine speed information. Each gauge is dedicated to a parameter within a machine system. The gauges receive information from sensors or senders that are connected to the machine ECM. The Machine ECM uses the information from each sensor to calculate a value which is communicated over the data link and displayed as a gauge.The monitoring system provides the user access to the following functions:
Interpret status information
Interpret parameters
View service intervals
Perform calibrations
Troubleshoot machine systems
Illustration 2 g03698912
Monitor with warning information displayed
(6) Alert Indicator Lamp
(7) Warning display area
(8) Multi-information area
(9) Keypad When conditions warrant, a number of fault or event messages are displayed on the monitor. The alert indicators notify the operator of an abnormal condition in a machine system. The monitor uses information programmed into the Machine ECM to determine when an abnormal condition is present. The Machine ECM sends a message to the monitoring system display. The monitoring system displays a pop-up alert indicator for the machine system with the abnormal condition.