3G6889 CAP Caterpillar parts
120G, 12G, 130G, 140G, 14G, 160G, 16G, 416B, 426, 428, 621E, 621F, 623E, 627E, 627F, 631E, 637E, 651E, 657E, 814B, 815B, 816B, 824C, 825C, 826C, 834B, 910, 910E, 918F, 920, 924F, 926, 928F, 936F, 938G...
Rating:
Alternative (cross code) number:
CA3G6889
3G-6889
3G6889
CA3G6889
3G-6889
3G6889
Weight: 1 pounds 0 kg.
ARTICULATED TRUCK, WHEEL TRACTOR,
Compatible equipment models: 3G6889:
Number on catalog scheme:
7
For full view, you need register
Information:
Probable Causes
Inspect the vibration damper.
Engine supports
Driven equipment
Engine misfiring
Running roughRecommended Actions
Note: The procedures have been listed in order of probability. Complete the procedures in the order of the listed test steps.
Table 1
Troubleshooting Test Steps Values Results
1. Inspect the Vibration Damper
A. Clean any debris from around the damper. Check the vibration damper for damage.
B. Inspect the mounting bolts for damage and/or for wear. Refer to the Disassembly and Assembly manual.
Damper
Result: The vibration damper or the mounting bolts are damaged.
Repair: Replace the damaged vibration damper or the damaged mounting bolts.
Verify that the repair eliminated the problem.
Result: The vibration damper or the mounting bolts are not damaged.
Proceed to Test Step 2.
2. Inspect the Engine Supports
A. Inspect the mounts and the brackets while you run the engine through the speed range. Look for mounts and brackets that are loose and/or broken.
B. Check the alignment of the following before operating the engine under load for any length of time:
– Mounts
– Coupling
Engine Supports
Result: The mounts and brackets are loose and/or broken.
Repair: Replace the mounts and brackets that are loose and/or broken.
Verify that the repair eliminated the problem.
Result: The mounts and brackets are not loose and/or broken.
Proceed to Test Step 3.
3. Inspect the Driven Equipment
A. Inspect the mounting bolts for the driven equipment. Inspect the alignment and the balance of the driven equipment.
B. Inspect the coupling.
Driven Equipment
Result: The driven equipment and the alignment are OK.
Proceed to Test Step 4.
Result: The driven equipment and the alignment are NOT OK.
Repair: Repair or replace the driven equipment.
Verify that the repair eliminated the problem.
4. Check the Operations of the Engine
A. Refer to Troubleshooting, "Engine Misfires, Runs Rough, or Is Unstable", for more information.
Engine Operation
Result: The engine is running rough or misfiring.
Repair: Perform the necessary repairs.
Verify that the repair eliminated the problem.
If the procedure did not correct the issue, contact your Cat dealer Technical Communicator (TC). For further assistance, your TC can confer with the Dealer Solutions Network (DSN).
Inspect the vibration damper.
Engine supports
Driven equipment
Engine misfiring
Running roughRecommended Actions
Note: The procedures have been listed in order of probability. Complete the procedures in the order of the listed test steps.
Table 1
Troubleshooting Test Steps Values Results
1. Inspect the Vibration Damper
A. Clean any debris from around the damper. Check the vibration damper for damage.
B. Inspect the mounting bolts for damage and/or for wear. Refer to the Disassembly and Assembly manual.
Damper
Result: The vibration damper or the mounting bolts are damaged.
Repair: Replace the damaged vibration damper or the damaged mounting bolts.
Verify that the repair eliminated the problem.
Result: The vibration damper or the mounting bolts are not damaged.
Proceed to Test Step 2.
2. Inspect the Engine Supports
A. Inspect the mounts and the brackets while you run the engine through the speed range. Look for mounts and brackets that are loose and/or broken.
B. Check the alignment of the following before operating the engine under load for any length of time:
– Mounts
– Coupling
Engine Supports
Result: The mounts and brackets are loose and/or broken.
Repair: Replace the mounts and brackets that are loose and/or broken.
Verify that the repair eliminated the problem.
Result: The mounts and brackets are not loose and/or broken.
Proceed to Test Step 3.
3. Inspect the Driven Equipment
A. Inspect the mounting bolts for the driven equipment. Inspect the alignment and the balance of the driven equipment.
B. Inspect the coupling.
Driven Equipment
Result: The driven equipment and the alignment are OK.
Proceed to Test Step 4.
Result: The driven equipment and the alignment are NOT OK.
Repair: Repair or replace the driven equipment.
Verify that the repair eliminated the problem.
4. Check the Operations of the Engine
A. Refer to Troubleshooting, "Engine Misfires, Runs Rough, or Is Unstable", for more information.
Engine Operation
Result: The engine is running rough or misfiring.
Repair: Perform the necessary repairs.
Verify that the repair eliminated the problem.
If the procedure did not correct the issue, contact your Cat dealer Technical Communicator (TC). For further assistance, your TC can confer with the Dealer Solutions Network (DSN).
Cat SIS web machinery list:
Parts cap Caterpillar catalog:
12G, 12H, 12H ES, 12H NA, 12K, 130G, 140G, 140H, 140H ES, 140H NA, 140K, 140K 2, 143H, 160G, 160H, 160H ES, 160H NA, 160K, 163H, 163H NA, 528, 528B, 530B, 950, 950B, 950B/950E, 950F, 950F II, 960F
14G, D9R, D9T
120G, 130G
120G
120G, 120H, 120H NA, 120K, 120K 2, 12G, 12H, 12H ES, 12H NA, 12K, 130G, 135H, 135H NA, 140G, 140H, 140H ES, 140H NA, 140K, 140K 2, 143H, 160G, 160H, 160H ES, 160H NA, 160K, 163H, 163H NA
120G, 12G, 130G, 140G, 160G
120, 120B, 120G, 120H, 120H ES, 120H NA, 120K, 120K 2, 120M, 120M 2, 12E, 12F, 12G, 12H, 12H ES, 12H NA, 12K, 12M, 12M 2, 12M 3, 12M 3 AWD, 130G, 135H, 135H NA, 140, 140B, 140G, 140H, 140H ES, 140H NA...
120H, 120H ES, 120H NA, 120K, 120K 2, 120M, 120M 2, 12G, 12H, 12H ES, 12H NA, 12K, 12M, 12M 2, 12M 3, 12M 3 AWD, 130G, 135H, 135H NA, 140G, 140H, 140H ES, 140H NA, 140K, 140K 2, 140M, 140M 2, 140M 3, ...
120H, 120H ES, 120H NA, 120K, 120K 2, 12G, 12H, 12H ES, 12H NA, 12K, 130G, 135H, 135H NA, 140G, 140H, 140H ES, 140H NA, 140K, 140K 2, 143H, 160G, 160H, 160H ES, 160H NA, 160K, 163H, 163H NA
14G, 14H, 14H NA, 14M
14G, 14H, 14H NA, 16G, 16H, 16H NA
14G, 16
416, 416B, 416C, 416D, 420D, 424B, 424D, 426B, 426C, 428, 428B, 428C, 430D, 436C, 446, 446B, 446D
120, 120G, 12E, 12F, 140, 14E, 2470C, 2570C, 2670C, 2864C, 414E, 416, 416B, 416C, 416D, 416E, 416F, 420D, 420E, 420F, 422E, 424D, 426, 426B, 426C, 428, 428B, 428D, 428E, 430D, 430E, 430F, 432D, 432E, ...
1023684
CAP-SEALING
416B, 426B, 428B, 436B
416B, 426B, 428B, 436B
416, 416B, 426, 426B, 428, 428B, 436B
416, 416B, 426, 426B, 428, 428B, 436B
216, 228, 236, 236B, 236B3, 242B3, 246C, 247, 248, 252B, 252B3, 256C, 257B3, 259B3, 262C, 262C2, 267, 267B, 268B, 272C, 277C, 277C2, 279C, 279C2, 287, 287C, 287C2, 289C, 289C2, 297C, 299C, 3044C, 3054...
120G, 120H, 120H ES, 120H NA, 120K, 120K 2, 12F, 12G, 12H, 12H ES, 12H NA, 12K, 130G, 135H, 135H NA, 140, 140G, 140H, 140H ES, 140H NA, 140K, 140K 2, 141, 143H, 14E, 14G, 14H, 14H NA, 153, 16, 160G, 1...
215B, 215D, 216, 216B, 216B3, 219D, 225, 225D, 226B, 226B3, 228, 229, 229D, 231D, 232B, 235B, 235C, 235D, 236, 236B, 236B3, 236D, 242B, 242B3, 242D, 245B, 246C, 246D, 247, 247B, 247B3, 248, 252B, 252B...
140M, 2384C, 242B3, 2484C, 24M, 257B3, 259B3, 2864C, 301.5, 302.5, 303.5, 304, 305, 305.5, 306, 307, 307B, 307C, 307D, 308C, 311D LRR, 311F LRR, 312, 312B L, 312C, 312D, 312D L, 312D2, 312D2 GC, 312D2...
9R5482
CAP
416B, 426B, 428, 428B, 438
416B, 426B, 428, 428B, 438
416B, 416C, 416D, 416E, 420D, 424D, 426B, 426C, 428B, 428C, 428D, 430D, 432D, 436B, 436C, 438B, 438C, 438D, 442D
120H, 12H, 12H NA, 140H, 140H NA, 14H, 14H NA, 16H, 16H NA, 416B, 416C, 416D, 420D, 424B, 424D, 426B, 426C, 428B, 428C, 428D, 430D, 432D, 436C, 438B, 438C, 438D, 442D, 550, 550B, 554, 560B, 570, 570B,...