CAP 4357527 - Caterpillar

Illustration 6 g01237663
Remove guard assembly (12) .
Illustration 7 g01237659
Turn fuel valves (13) to the OFF position. Disconnect tube assemblies (14) .
Illustration 8 g01237646
Disconnect harness assembly (15). Remove clip (16) .
Illustration 9 g01237649
Illustration 10 g01237650
Disconnect harness assembly (17). Remove clip (18) .Note: If necessary, Remove additional connecting hardware.Note: Harness assembly (17) is located under the cab on the left side of the frame assembly.
Illustration 11 g01253372
Remove bolts (19). Remove bolts (20). Use two people in order to remove panel assembly and handrail (21). The weight of panel assembly and handrail (21) is approximately 27 kg (60 lb).
Illustration 12 g01253383
Attach Tooling (A), Tooling (B), and a suitable lifting device onto platform assembly (22). The weight of platform assembly (22) is approximately 100 kg (220 lb).
Illustration 13 g01253386
Remove bolts (23) .
Illustration 14 g01253780
Illustration 15 g01253783
Remove bolts (24). Remove bolts (25). Remove platform assembly (22) .
Illustration 16 g01253789
Illustration 17 g01253792
Illustration 18 g01253795
Attach Tooling (A), Tooling (B), and a suitable lifting device onto hydraulic oil tank (26), as shown. The weight of hydraulic oil tank (26) is approximately 208 kg (458 lb).
Remove bolts (27). Remove mount (28). Position hydraulic oil tank (26) out of the way.
Illustration 19 g01253798
Illustration 20 g01253799
Attach Tooling (C) and a suitable lifting device onto fuel tank (29). The weight of fuel tank (29) is approximately 771 kg (1700 lb).
Remove bolts (30) .
Remove bolts (31) .
Remove fuel tank (29) .