CAP AS 4432047 - Caterpillar

Illustration 1 g02563987
(6) Tapped holes for accessory drive
Table 1
Specification for 361-5599 Front Gear Gp
Item Qty Part Specification Description
1 1 363-5182 Camshaft Drive Gear Number of teeth is 96.
Bore of the gear is 58.900 0.013 mm (2.3189 0.0005 inch).
2 - - Align the timing marks on the idler gear to the timing marks on the camshaft gear and the marks on the crankshaft gear.
3 1 361-5600 Idler Gear As Number of teeth is 72.
Bore of the gear for bearing is 74.452 0.015 mm (2.9312 0.0006 inch).
Bore of the bearing after installation is 69.205 0.013 mm (2.7246 0.0005 inch).
The bearing is recessed from the back of the gear is 1.00 0.25 mm (0.039 0.010 inch).
4 1 360-0444 Gear As Number of teeth is 64.
Bore of the gear for bearing is 60.163 0.015 mm (2.3686 0.0006 inch).
Bore of the bearing after installation is 55.663 0.013 mm (2.1915 0.0005 inch).
The bearing is recessed from the back of the gear is 1.00 0.25 mm (0.039 0.010 inch).
5 1 361-5595 Crankshaft Gear Number of teeth is 48
Bore of the gear is 96.900 0.020 mm (3.8150 0.0008 inch).