CAP AS-EXHAUST 4903159 - Caterpillar

When Required
Engine Air Intake System - Service Ether Starting Aid Cylinder - Replace empty cylinders Fuel System - Service when loss of power Radiator - Clean, replace pressure cap Cooling System - Replace coolant if dirty Fuses and Circuit Breakers - Replace/Reset Windshield Wipers and Washer - Inspect/Replace Bucket Edge - Replace if damaged Bucket Tips - Replace if damaged Seat - Lubricate fittings Filter Elements - InspectEvery 10 Service Hours or Daily
Engine Crankcase Oil - Check oil level Transmission System Oil - Check oil level Hydraulic Tank Oil - Check oil level Radiator - Check coolant level Fuel Tank - Drain water and sediment Air Reservoir - Drain moisture and sediment Walk-Around Inspection - Inspect machine Seat Belt - Inspect Brakes, Indicators and Gauges - Test Back-up Alarm - Test Bucket Lower Pivot Pins - Lubricate daily in severe applicationsEvery 50 Service Hours or Weekly *
Cab Air System - Clean filters Bucket Lower Pivot Pins - Lubricate Tires - Check inflation pressureEvery 100 Service Hours or 2 Weeks *
Rear Axle Trunnion - Lubricate Bucket Cylinder and Linkage Bearings - Lubricate Bucket Upper Pivot Pin - Lubricate Steering Cylinder Bearings - Lubricate Logging Fork Clamp (If Equipped) - LubricateEvery 250 Service Hours or Monthly *
Engine Oil and Filter - Change the Oil and Filter. If the sulfur content in the fuel is greater than 1.5% by; weight, use an oil with a TBN of 30 and reduce the oil change interval by one half Engine Valve Lash - Adjust on new or reconditioned engines at first oil change only Coolant System - Add supplemental additive Brakes - Test Brake Fluid Reservoirs - Check oil level Drive Shaft Spline - Lubricate Fan Bearing - Lubricate Air Conditioner (If Equipped) - Test Fan and Alternator Belts - Inspect/Adjust/Replace Batteries - CheckEvery 500 Service Hours or 3 Months *
Transmission Filter - Change filter Hydraulic System - Change filters Fuel System Filters - Change filters/Clean screen Fuel Tank Cap and Fill Screen - Clean Engine Crankcase Breathers - CleanEvery 1000 Service Hours or 6 Months *
Transmission Oil - Change oil Drive Shaft Universal Joints - Lubricate Drive Shaft Support Bearing - Lubricate Frame Pivot Bearings - Lubricate Rollover Protective Structure (ROPS) - InspectEvery 2000 Service Hours or 1 Year *
Hydraulic Tank Oil - Change oil Differentials and Final Drives - Change oil Engine Valve Lash - Adjust Engine Valve Rotators - CheckEvery 3000 Service Hours or 2 Years *
Cooling System Coolant - Change Coolant*First Perform Previous Service Hours Items