CAP 4B7435 - Caterpillar

Remove bolts (16) and head (17).
Illustration 5 g03547484
Remove O-ring seal (18), port plate (20), and bearing cup (19).
Illustration 6 g01321457
Remove bearing cone (21).
Illustration 7 g01321459
Remove shim (22) and barrel assembly (23).
Illustration 8 g01321461
Remove pistons (24), plate (25), and bearing (26).
Illustration 9 g01321463
Illustration 10 g01321464
Illustration 11 g01321466
Personal injury can result from being struck by parts propelled by a released spring force.Make sure to wear all necessary protective equipment.Follow the recommended procedure and use all recommended tooling to release the spring force.
Use a suitable press to remove retaining ring (27) from barrel assembly (23).
Remove washers (28), spring (29), and pins (30).
Illustration 12 g01321467
Personal injury can result from being struck by parts propelled by a released spring force.Make sure to wear all necessary protective equipment.Follow the recommended procedure and use all recommended tooling to release the spring force.
Remove plug (31) and the O-ring seal.
Illustration 13 g01321468
Remove piston (32).
Illustration 14 g01321469
Remove swashplate (33) and rod (34).
Illustration 15 g01321470
Remove shaft (37), spring (38), screws (36), and bearings (35).
Illustration 16 g01321472
Use Tooling (A) and a suitable press to remove bearing cone (40) from shaft (37).
Illustration 17 g01321481
Remove retaining ring (41), lip seal (42), and bearing cup (43).