CAP 4S9063 - Caterpillar

Illustration 1 g03834800
Table 1
Specification for the 340-3707 Engine Oil Lines Gp    
Item    Qty    Part    Specification Description    
1     2     6B-9202 Spring     Length under test force is
68.3 mm (2.69 inch).    
Test force is
84.5 to 99.6 N (19.0 to 22.4 lb).
Free length after test is
112.7 mm (4.4 inch).
2     1     2W-1053 Plug     Torque to
100 15 N m (74 11 lb ft)    
3     2     109-2332 O-Ring Seal     Lubricate the bore lightly with the lubricant that is being sealed.    
4     2     237-7623 O-Ring Seal     Lubricate the bore lightly with the lubricant that is being sealed.    
5     2     0S-1594 Bolt     Use the following procedure in order to tighten the bolts of the clamp assembly:
1. Tighten the clamp assembly until the clamp assembly snug to tube.
2. Tighten the clamp assembly to the adapter.
3. Tighten the clamp assembly to the tube.    
6     2     0S-1571 Bolt    
7     1     2W-1635 Spring     Length under test force is
102.0 mm (4.02 inch).    
Test force is
518 26 N (116 6 lb).
Free length after test is
143.4 mm (5.65 inch).