4T8087 CAP-BEARING Caterpillar parts
D8L, D8N, D9N
Rating:
Alternative (cross code) number:
CA4T8087
4T-8087
4T8087
CA4T8087
4T-8087
4T8087
Weight: 17 pounds 8 kg.
TRACK-TYPE TRACTOR,
Information:
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 136-4149 Governor Pliers 1 Start By:
Remove the rocker shaft and the pushrods. Refer to Disassembly and Assembly, "Rocker Shaft and Pushrod - Remove".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g00613071
Remove clip (4). Clip (4) is located between the governor and the cylinder head.
Illustration 2 g00655975
Use Tooling (A) to slide tube assembly (5) into the cylinder head.
Illustration 3 g00613149
Remove the clip and use Tooling (A) to remove the clevis pin (6). Clevis pin (6) connects the governor to the control lever of the fuel injection control linkage. Note: Clevis pin (6) must stay with the governor in order to be adjusted.
Illustration 4 g00630566
Remove bolts (1) and remove fuel injection control linkage (2). Control lever (3) connects the fuel injection control linkage (2) to the governor. Note: For information on the inspection procedure for control lever (3), refer to Special Instruction, REHS0601, "Inspection and Modification of the 102-7459 Fuel Injection Control Linkage and the 4P-9048 Fuel Injection Control Linkage".
Table 1
Required Tools
Tool Part Number Part Description Qty
A 136-4149 Governor Pliers 1 Start By:
Remove the rocker shaft and the pushrods. Refer to Disassembly and Assembly, "Rocker Shaft and Pushrod - Remove".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g00613071
Remove clip (4). Clip (4) is located between the governor and the cylinder head.
Illustration 2 g00655975
Use Tooling (A) to slide tube assembly (5) into the cylinder head.
Illustration 3 g00613149
Remove the clip and use Tooling (A) to remove the clevis pin (6). Clevis pin (6) connects the governor to the control lever of the fuel injection control linkage. Note: Clevis pin (6) must stay with the governor in order to be adjusted.
Illustration 4 g00630566
Remove bolts (1) and remove fuel injection control linkage (2). Control lever (3) connects the fuel injection control linkage (2) to the governor. Note: For information on the inspection procedure for control lever (3), refer to Special Instruction, REHS0601, "Inspection and Modification of the 102-7459 Fuel Injection Control Linkage and the 4P-9048 Fuel Injection Control Linkage".
Caterpillar parts catalog:
Parts cap Caterpillar catalog:
6F2905
CAP-BEARING
5S, 6A, 6S, 7A, 7G, 8 SR, 814B, 814S, 816B, 824C, 824S, 825C, D6D, D6E, D6H, D6H XL, D6H XR, D6R, D7F, D8L
5S, 6A, 6S, 7A, 7G, 8 SR, 814B, 814S, 816B, 824C, 824S, 825C, D6D, D6E, D6H, D6H XL, D6H XR, D6R, D7F, D8L
6N3896
CAP
589, 69D, 769C, 769D, 771C, 771D, 772B, 773B, 773D, 773E, 773F, 775B, 775D, 775E, 775F, 983B, AD40, AD45, AE40, AE40 II, D10N, D10R, D10T, D10T2, D11T, D9L, D9N, D9R, D9T
589, 69D, 769C, 769D, 771C, 771D, 772B, 773B, 773D, 773E, 773F, 775B, 775D, 775E, 775F, 983B, AD40, AD45, AE40, AE40 II, D10N, D10R, D10T, D10T2, D11T, D9L, D9N, D9R, D9T
3069441
CAP AS-TRACK IDLER
578, 973D, D8N, D8R, D8R II, D8T
578, 973D, D8N, D8R, D8R II, D8T
1933063
CAP-BEARING
834G, 834H, 834K, D6R III, D6T, D6T LGP, D6T LGPPAT, D6T XL, D7E, D7E LGP, D7R, D7R II, D7R XR, D8N, D8R, D8R II, D8T
834G, 834H, 834K, D6R III, D6T, D6T LGP, D6T LGPPAT, D6T XL, D7E, D7E LGP, D7R, D7R II, D7R XR, D8N, D8R, D8R II, D8T
3J5190
CAP
515, 525, 525B, 525C, 535B, 535C, 545, 545C, 824S, 8A, 8S, 8U, 9A, D8L, D8N, D8R, D8R II, D8T
515, 525, 525B, 525C, 535B, 535C, 545, 545C, 824S, 8A, 8S, 8U, 9A, D8L, D8N, D8R, D8R II, D8T
6F7523
CAP
7A, 7S, 8 SR, 824B, 824G, 824G II, 824H, 824K, 824S, 825C, 825G, 825G II, 825H, 825K, 826C, 834, 834B, 836, 8A, 8S, 8U, 9A, D7G, D7G2, D7H, D7R, D7R II, D8H, D8K, D8N, D8R, D9E, D9G, D9L
7A, 7S, 8 SR, 824B, 824G, 824G II, 824H, 824K, 824S, 825C, 825G, 825G II, 825H, 825K, 826C, 834, 834B, 836, 8A, 8S, 8U, 9A, D7G, D7G2, D7H, D7R, D7R II, D8H, D8K, D8N, D8R, D9E, D9G, D9L
8J9013
CAP
8A, 8S, D8N
8A, 8S, D8N
3G0910
CAP
24H, 24M, 824G, 824G II, 824H, 824K, 825G, 825G II, 825H, 825K, 826G, 826G II, 826H, 826K, 834G, 834H, 834K, 836G, 836H, 836K, 844, 844H, 844K, 8A, 8S, D7E, D7E LGP, D7H, D7R, D7R II, D7R XR, D8L, D8N...
24H, 24M, 824G, 824G II, 824H, 824K, 825G, 825G II, 825H, 825K, 826G, 826G II, 826H, 826K, 834G, 834H, 834K, 836G, 836H, 836K, 844, 844H, 844K, 8A, 8S, D7E, D7E LGP, D7H, D7R, D7R II, D7R XR, D8L, D8N...
6T4504
CAP AS-TRACK ROLLER
D8L, D8N, D9R
D8L, D8N, D9R
1606310
CAP-BEARING
D7E, D8L, D8R, D8T, D9N, D9R, D9T
D7E, D8L, D8R, D8T, D9N, D9R, D9T
1606309
CAP-BEARING
D8N, D8R, D8R II, D8T
D8N, D8R, D8R II, D8T
7T3560
CAP-BEARING
844, 844H, 844K, D8L, D9N
844, 844H, 844K, D8L, D9N
6E3099
CAP
935C II
935C II
5H8022
CAP GRP
977D
977D
1H5850
CAP GRP
977D
977D
1H5849
CAP GRP
977D
977D
1H5851
CAP GRP
977D
977D
3W4531
CAP
963
963
4D9924
CAP
651, 657, D8N
651, 657, D8N
8E6185
CAP AS
D8N
D8N
2K7124
CAP
955C
955C
1019333
CAP AS
D7H
D7H
7V2744
CAP
814B, 815B, 816B, 824C, 826C, 916, 926, 936, 936F, 950B, 950F, 950F II, 966D, 966F, 980C, 980F, CS-643, D5B, G936, IT28, IT28B
814B, 815B, 816B, 824C, 826C, 916, 926, 936, 936F, 950B, 950F, 950F II, 966D, 966F, 980C, 980F, CS-643, D5B, G936, IT28, IT28B