CAP-BEARING 4T9702 - Caterpillar

Illustration 1 g02909217
Illustration 2 g02909218
View A-A
Table 1
Specification for 276-8901 Electric Starting Motor Gp
Item Qty Part Specification Description
B - - Clearance between the pinion and the housing is 9.1 mm (0.36 inch).
1 2 8T-4244 Nut Final installation torque for the ground terminal nut is 26.0 1.5 N m (230.1 13.3 lb in).
2 1 4B-2049 Nut Final installation torque for the switch terminal nut is 2.25 0.25 N m (19.91 2.21 lb in).
3 1 5C-2874 Nut The switch terminal must be insulated with heat shrink tubing. Do not use molded terminals.
Final installation torque for the switch terminal nut is 2.25 0.25 N m (19.91 2.21 lb in).
4 1 6V-8188 Nut Final installation torque for the motor terminal nut is 26.0 1.5 N m (230.1 13.3 lb in).
5 1 8T-4244 Nut A maximum of three cable terminals or wire terminals may be used with the battery terminal nut. A maximum of two of the cable terminals may be equal to or greater than 0 AWG.
Final installation torque for the battery terminal nut is 26.0 1.5 N m (230.1 13.3 lb in).
6 - - Final installation torque for the motor frame terminal nut is 26.0 1.5 N m (230.1 13.3 lb in).
- - - Pull-in current at 20 V and 25° C (77° F) is 49.3 3.3 amp.
Hold-in current at 20 V and 25° C (77° F) is 6.8 amp max.
- - - When the electric starting motor is viewed from the pinion end, the motor rotates in the clockwise direction.
- - - No load conditions at 25 °C (77 °F):
Speed is 6950 1650 rpm.
Current draw is 115 25 amp.
Voltage is 23 VDC.