CAP AS-FUEL 5056524 - Caterpillar

Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g03321609
Attach a suitable lifting device to oil scavenge pump (11). The weight of the oil scavenge pump is approximately 32 kg (71 lb). Lift the oil scavenge pump into position. Install bolts (10) in order to secure the pump.
Install elbow (9) with bolts (8).
Illustration 2 g03321579
Inspect O-ring seals (7). If a seal is cut, scratched, or cracked, obtain a new seal for assembly. Coat the bores for the O-ring seals with clean engine oil. Install the O-ring seals into tube (6).
Install tube (6) onto the pump. Secure the tube with clips, washers, and bolts (5).
Illustration 3 g03321577
Clean the two screens from inside housing (2). Inspect the screens for good condition. Obtain new parts, if necessary. Place the screens into the housing.
Place cover (4) onto the housing. Secure the cover with bolts (3) and the washers.
Place the housing into position on the tube. Install the housing with bolts (1). End By:
Install the engine oil pan. Refer to Disassembly and Assembly, "Engine Oil Pan - Install".