CAP-DUST 5172482 - Caterpillar

Illustration 2 g03708437
281-8214 Auxiliary Hydraulic Lines Gp Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Note: Put identification marks on all hoses, on all hose assemblies, on all harness assemblies, and on all tube assemblies for installation purposes. Plug all hose assemblies and all tube assemblies. Plugging hoses and tubes helps to prevent fluid loss, and helps to keep contaminants from entering the system.
Illustration 3 g03708468
(1) 093-1291 Clamp (2) 187-9833 Plate (3) 193-6662 Plate (4) 245-2184 Tube As (5) 245-2187 Tube As (6) 245-2190 Tube As (7) 245-2193 Tube As (8) 245-2196 Tube As (9) 245-2199 Tube As (10) 253-6458 Clip As (11) 268-7112 Clip (12) 288-7641 Clip As (13) 294-3794 Clip As (14) 294-3795 Clip As (15) 294-3798 Plate (16) 294-3799 Plate (17) 447-1708 Bolt (18) 451-2175 Hard Washer (19) 202-7021 Clip (20) 6V-8398 O-Ring Seal (21) 7J-9108 O-Ring Seal (22) 7Y-3732 Clip (23) 8T-4121 Hard Washer (24) 8T-4133 Nut (25) 8T-4139 Bolt (26) 8T-4184 Bolt (27) 8T-4185 Bolt (28) 8T-4194 Bolt (29) 8T-4223 Hard Washer (30) 8T-4244 Nut (31) 8T-4648 Bolt
Install boom lines group on left and right side of the boom.
Tighten all hardware to standard torque unless otherwise specified. Refer to Specifications, SENR3130, "Torque Specifications".
Illustration 4 g00687600
Personal injury or death can result from escaping fluid under pressure.Escaping fluid under pressure, even a very small pin-hole size leak, can penetrate body tissue, causing serious injury, and possible death.Always use a board or cardboard when checking for a leak.Do not check for pin hole leaks in pump or motor hoses during a steer stall condition. If fluid is injected into your skin, it must be treated by a doctor familiar with this type of injury immediately.
Inspect the fittings for hydraulic leaks.