CAP AS 5214829 - Caterpillar

Removal Procedure
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Drain the coolant from the cooling system into a suitable container for storage or disposal. Refer to Operation and Maintenance Manual, "Cooling System Coolant - Change".
Illustration 1 g01145002
Illustration 2 g01148173
Remove tube assembly (2) .
Disconnect tube assemblies (1) and tube assembly (4) .Note: Before you remove the turbocharger, mark the location and the orientation of the turbocharger for installation purposes.
Attach a suitable lifting device to turbocharger (5) . The weight of turbocharger (5) is approximately 45 kg (100 lb).
Remove nuts (3) . Remove turbocharger (5) and the gasket.