CAP 5469468 - Caterpillar

Illustration 1 g03705810
(1) Direction Keys The "Password Entry" menu option is entered by selecting "Service" from the Main Menu. Once "Password Entry" is selected, press the "OK" key.The following screen will be displayed.
Illustration 2 g03705824
(2) OK Key
(3) Back Key The Direction keys (1) are used to input the password. Press the Left key or the Right key to highlight the desired character. Press the Back key (3) in the keypad guidance area to delete a selected character. When four characters have been entered, press the"OK" key (2). The monitoring system will check the password. If the password is correct, the user will be allowed access to the menu.If the password is incorrect, "Incorrect Password" will be displayed. Press the "OK" key to retry the password in the previous screen. Refer to Illustration 2.Note: The Owner password is "0000". The Dealer password is "FFF2". After entering the password, press the "OK" key.
Illustration 3 g03719700
The Service menu (Owner)
The Dealer password (FFF2) allows access to all menus that are used for service. Press the Left or Right key to change the position of the flashing character. When the desired character is highlighted, press the "OK" key. After the "OK" key has been pressed, the monitor will prompt the user for the next character. After all four characters have been entered, press "OK". The Service menu will appear.
Illustration 4 g03719707
The Service menu (Dealer)
When the correct password has been entered, a red unlocked symbol on monitor indicates that Dealer mode has been entered.Once the password has been entered, the Dealer menu options will be active until the machine is powered down (Key Off). Upon the next start (Key On), the password must be re-entered to enable the Dealer menu options again.