CAP AS-OIL FILLER 5L2952 - Caterpillar

Removal Procedure
Start By:
Remove the turbochargers. Refer to Disassembly and Assembly, "Turbocharger - Remove".
Illustration 1 g01364071
Remove bolts (1) .
Illustration 2 g01364072
Remove bolts (2) from exhaust manifold (3) .
Illustration 3 g01364073
Remove mounting plate (5) , if necessary.
Attach a suitable lifting device to exhaust manifold (3) . The weight of exhaust manifold (3) is approximately 34 kg (75 lb).
Remove nuts (4) , the spacers, and exhaust manifold (3) .Installation Procedure
Table 1
Required Tools    
Tool     Part Number     Part Description     Qty    
A     5P-3931     Anti-Seize Compound     -    
Illustration 4 g01364073
Illustration 5 g01364134
Attach a suitable lifting device to exhaust manifold (3) . The weight of exhaust manifold (3) is approximately 34 kg (75 lb).
Apply Tooling (A) to all bolts, studs, and nuts.
Position exhaust manifold (3) onto the engine.Note: Discard the nuts after use. Use new nuts for installation.
Install the spacers and nuts (4) .
Tighten nuts (4) in a numerical sequence to a torque of 38 5 N m (28 4 lb ft).
Install mounting plate (5) , if necessary.
Illustration 6 g01364072
Install bolts (2) on exhaust manifold (3) .
Illustration 7 g01364071
Install bolts (1) .End By: Install the turbochargers. Refer to Disassembly and Assembly, "Turbocharger - Install".