CAP AS-OIL FILLER 7W1484 - Caterpillar

Engine:
C18 (S/N: ZKB1-UP)
Generator Set:
C18 (S/N: C6C1-UP; G4C1-UP; DKE1-UP; STD1-UP; PEJ1-UP; NKK1-UP; STM1-UP; EKW1-UP)
Industrial Engine:
C18 (S/N: JDA1-UP; NBB1-UP; WJH1-UP)
Petroleum Engine:
C18 (S/N: WJW1-UP)
The new heat shield is used in order to increase the service life of the seal for the valve cover base.The 272-6658 Heat Shield is adaptable back to first production on the serial numbers that are listed above. Refer to the "Installation Procedure" for the procedure that is used in order to install the new heat shield.Refer to Table 1 for the parts that are needed in order to install the 272-6658 Heat Shield.
Table 1
Required Parts    
New Part Number     Description     Quantity    
272-6658     Heat Shield     1    
9B-7237     Bolt     1    
106-4159     Spacer     1    
8T-2502     Bolt     3    
091-0081     Spacer     3    
8T-4896     Hard Washer     4    
3E-6909     Clip     1    Installation Procedure
Illustration 1 g02031774
Turbocharger water line (1) Mounting hardware (2) Clip (3) Bolt
Remove clip (2) and retain mounting hardware (1) .
Remove bolt (3). Retain the bracket from behind bolt (3) .
Illustration 2 g02032334
Turbocharger oil line (4) Clip (5) Spacer (6) Bolt
Remove bolt (6). Discard both bolt (6) and spacer (5). Retain clip (4) .