CAP 8N3833 - Caterpillar

Lower or block blade before servicing the machine. Attach tags to controls while machine is being serviced. Connect frames with safety link before servicing center area of machine.Do not attempt adjustments while machine is moving or the engine is running.Use caution when removing radiator cap, drain plugs, grease fittings or pressure taps.Replace or repair broken or damaged equipment. Use proper tools.Wear safety glasses and shoes as required.Do not smoke while refueling.Operate engines only in well ventilated area.Store oily rags and other combustible material in a safe place.Promote good housekeeping. Keep tools and work area clean.Do not allow unauthorized personnel on machine when it is being serviced.
To avoid possible weakening of the ROPS (Rollover Protection Structure), consult a Caterpillar dealer before altering the ROPS in any way. The protection offered by the ROPS will be impaired if it has been subjected to structural damage or has been involved in an overturn incident.
Personal injury can result if machine is articulated when someone is in the pivot area. Install safety pin, shut off engine and relieve hydraulic pressure before working in pivot area.
When using pressure air, wear safety face shield and protective clothing. Use 30 PSI (2 kg/cm2) maximum pressure air for cleaning purposes.
Turn disconnect switch OFF and remove key before servicing electrical system. Read warning and caution information provided on the machine. Follow servicing instructions carefully.