CAPSCREW 0773456 - Caterpillar

Make sure all hydraulic pressure is released from the system before any hydraulic lines or hoses are disconnected.
1. Remove bolts (1) and cover (2).2. Disconnect hydraulic lines (3).3. Remove retainer ring (4). 4. Lower the stabilizer street pad to the floor. Remove retainer ring (5) and pin (6) from the stabilizer arm. 5. Fasten Tool (A) and a hoist to the cylinder. Remove pin (7) and remove the cylinder from the stabilizer arm. The following steps are for the installation of the stabilizer cylinders.6. Put the stabilizer cylinder in position in the stabilizer arm with Tool (A) and a hoist. Install pin (7).7. Install pin (6) and retaining ring (5).8. Install retaining ring (4). Connect hydraulic lines (3).9. Install cover (2) and bolts (1).