CAPSULE-SEAL 4867587 - Caterpillar

Torque Converter Outlet Pressure
ReferenceRefer to Testing & Adjusting, UENR3457, "Torque Converter Outlet Relief Valve Pressure - Test and Adjust (Rear Power Train)" for more detail on the following test.
Table 38
Status (1)     Description     Specification     Actual     Comments    
    Port 3    
280 70 kPa (41 10 psi)            
    Port 2    
85 20 kPa (12 3 psi)            
( 1 ) N = Normal, M = Monitor, A = ActionSynchronizing Valve Pressure
ReferenceRefer to Testing & Adjusting, UENR3457, "Synchronizing Valve Pressure - Test and Adjust (Rear Power Train)" for more detail on the following test.
Table 39
Status (1)     Description     Specification     Actual     Comments    
        Test Port (3)     Test Port (4)     Test Port (5)            
    Low Idle    
96 7 kPa (14 1 psi)    
0 0 kPa (0 0 psi)    
690 35 kPa (100 5 psi)            
    High Idle            
2070 30 kPa (300 4 psi)            
    High Idle (2)            
910 kPa (132 psi)            
( 1 ) N = Normal, M = Monitor, A = Action
( 2 ) With solenoid (2) disconnectedSpeed Clutch Pressure (P1) and Directional Clutch Pressure (P2)
ReferenceRefer to Testing & Adjusting, UENR3457, "Speed Clutch Pressure (P1) and Directional Clutch Pressure (P2) - Test and Adjust - Rear Power Train" for more detail on the following test.
Table 40
Status (1)     Description     Specification     Actual     Comments    
        Speed Clutch (3)     Direction Clutch (4)            
    Low Idle    
1862 kPa (270 psi)    
1524 kPa (221 psi)            
    High Idle    
2151 kPa (312 psi)    
1813 kPa (263 psi)            
( 1 ) N = Normal, M = Monitor, A = ActionS.O.S.
ReferenceRefer to Operation and Maintenance Manual, SEBU8794, "Maintenance Section" for more detail and port locations on the following S.O.S. service.
Table 41
Status (1)     Description     Obtain     Comments    
    Engine Oil Sample     Every 250 hours        
    Hydraulic System Oil Sample     Every 250 hours        
    Transmission Oil Sample     Every 250 hours        
    Brake Cooling Oil Sample     Every 500 hours        
    Differential and Final Drive Oil Sample     Every 500 hours        
    Engine Coolant Sample (Level I)     Every 500 hours        
    Engine Coolant Sample (Level II)     Every 2000 hours        
( 1 ) N = Normal, M = Monitor, A = Action