CARBURETOR 7B4721 - Caterpillar

Illustration 51 g01322829
Install clamps (25) and (26) to each turbocharger.
Illustration 52 g01322582
Illustration 53 g01322583
Attach Tooling (B) and a suitable lifting device to air cleaner assemblies (23). The weight of air cleaner assemblies (23) is approximately 113 kg (250 lb). Install air cleaner assemblies (23) and bolts (24).
Illustration 54 g01322580
Connect harness assembly (22) that is located behind the air filter service indicator.
Illustration 55 g01322579
Connect tube (21) to the air filter service indicator.
Illustration 56 g01322581
Install tubes (14) and (16). Connect clamps (19) and (20).
Illustration 57 g01322578
Connect tube (16) for the air cleaner. Install clamp (17). Install clamp (18).
Illustration 58 g01322576
Connect tube (14) for the air cleaner. Tighten clamp (15).
Illustration 59 g01322575
Connect cable assembly (13) to the electric starting motor.
Illustration 60 g01322574
Move refrigerant compressor (11) into position and install bolts (12). Install bracket (10). Connect three harness assemblies (9) to refrigerant compressor (11).
Illustration 61 g01322573
Install belt (8). Refer to Operation and Maintenance Manual, "Belts - Inspect/Adjust/Replace". Install guard (7).
Illustration 62 g01322572
Install clip (6).
Illustration 63 g01322569
Connect hose assemblies (3), (4), and (5).
Illustration 64 g01322567
Illustration 65 g01322568
Move cable assembly (1) into position. Connect cable assembly (1) and install clip (2).
Illustration 66 g00461867
Remove Tooling (A) from the frame for the bed.
Fill the hydraulic oil. Refer to Operation and Maintenance Manual, "Hydraulic System Oil - Change".
Fill the engine oil. Refer to Operation and Maintenance Manual, "Engine Oil and Filter - Change".End By:
Install the radiator. Refer to Disassembly and Assembly, "Radiator - Remove".