1340825 CARRIAGE AS Caterpillar parts
D9R, D9T
Rating:
Alternative (cross code) number:
CA1340825
134-0825
1340825
CA1340825
134-0825
1340825
Weight: 3307 pounds 1500 kg.
TRACK-TYPE TRACTOR,
Number on catalog scheme:
3
For full view, you need register
Information:
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1U-7505 Hydraulic Jack 1
B 4C-9612 Silicone Sealant -
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Drain the engine oil into a suitable container for storage or disposal. Refer to Operation and Maintenance Manual, "Engine Oil and Filter - Change".
Illustration 1 g02359183
Disconnect tube assembly (5).
Use Tooling (A) to support engine oil pan (2). The weight of engine oil pan (2) is approximately 25 kg (55 lb).
Remove bolts (1).
Lower engine oil pan (2) and the gasket.
If necessary, remove adapter assembly (3) and drain plugs (4). Installation Procedure
Install engine oil pan (2) in the reverse order of removal.
Apply Tooling (B) on the four socket joints of the gasket prior to installation.
If necessary, tighten drain plugs (4) to a torque of 80 10 N m (60 7 lb ft).
If necessary, tighten the drain plug on adapter assembly (3) to a torque of 70 15 N m (50 11 lb ft).
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1U-7505 Hydraulic Jack 1
B 4C-9612 Silicone Sealant -
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Drain the engine oil into a suitable container for storage or disposal. Refer to Operation and Maintenance Manual, "Engine Oil and Filter - Change".
Illustration 1 g02359183
Disconnect tube assembly (5).
Use Tooling (A) to support engine oil pan (2). The weight of engine oil pan (2) is approximately 25 kg (55 lb).
Remove bolts (1).
Lower engine oil pan (2) and the gasket.
If necessary, remove adapter assembly (3) and drain plugs (4). Installation Procedure
Install engine oil pan (2) in the reverse order of removal.
Apply Tooling (B) on the four socket joints of the gasket prior to installation.
If necessary, tighten drain plugs (4) to a torque of 80 10 N m (60 7 lb ft).
If necessary, tighten the drain plug on adapter assembly (3) to a torque of 70 15 N m (50 11 lb ft).
Caterpillar parts catalog:
Parts carriage Caterpillar catalog:
4T9654
CARRIAGE AS
D9N, D9R
D9N, D9R
3416560
CARRIAGE AS
D6K XL
D6K XL
3223353
CARRIAGE AS
D5R LGP, D6N, D6N LGP
D5R LGP, D6N, D6N LGP
2898410
CARRIAGE AS
973D
973D
2796187
CARRIAGE AS
D6G2 XL
D6G2 XL
3871089
CARRIAGE AS
D6R, D6R STD, D6T, D6T LGP, D6T LGPPAT
D6R, D6R STD, D6T, D6T LGP, D6T LGPPAT
7K3514
CARRIAGE ASSEM.
955K, 955L
955K, 955L