CARRIAGE GP-FORK 2611413 - Caterpillar

2611413 CARRIAGE GP-FORK Caterpillar parts 908H, 908H2

Price: query

Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA2611413
261-1413
2611413

Weight: 280 pounds 127 kg.

Buy CARRIAGE GP-FORK 2611413 Caterpillar genuine, new aftermarket tractor parts with delivery
COMPACT WHEEL LOADER,

Compatible equipment models: 2611413:

COMPACT WHEEL LOADER 908H 908H2 Caterpillar

Number on catalog scheme:

Caterpillar 2611413 Parts scheme CARRIAGE GP-FORK

For full view, you need register

Caterpillar SIS machinery equipment:

Caterpillar SIS

908M Compact Wheel Loader K5800001-UP (MACHINE) POWERED BY C3.3B Engine » 261-1413 CARRIAGE GP-FORK

908H Wheel Loader MXF00001-UP (MACHINE) POWERED BY 3044C Engine » 261-1413 CARRIAGE GP-FORK

908H Wheel Loader LMD00001-UP (MACHINE) POWERED BY C3.4 IND Engine » 261-1413 CARRIAGE GP-FORK

908H2 Wheel Loader JRD00001-UP (MACHINE) POWERED BY C3.3B Engine » 261-1413 CARRIAGE GP-FORK

908K Compact Wheel Loader L8800001-UP (MACHINE) POWERED BY C3.3B Engine » 261-1413 CARRIAGE GP-FORK

908M Compact Wheel Loader H8800001-UP (MACHINE) POWERED BY C3.3B Engine » 261-1413 CARRIAGE GP-FORK

908M Compact Wheel Loader Z8800001-UP (MACHINE) POWERED BY C3.3B Engine » 261-1413 CARRIAGE GP-FORK

Information:

Start By:a. remove cylinder head assembly 1. Use tool (A) to compress springs (1).2. Remove the locks.3. Remove tool (A), the valve, the rotocoil and the spring. If a valve can be used again, put identification on the valve for location at installation. 4. Use tool (B) to check spring force. The specifications for the spring are given in Specifications for 3406B Vehicular Engine.5. Do Steps 1 through 4 again for the remainder of valves.6. To install, put clean engine oil on the valve stem. Install washer (3), spring (1), rotocoil (2), and the valve. 7. Use tool (A) to compress the spring.8. Install the locks with the thick end up.
Locks can be thrown from valve when compressor is released, if they are not in their correct position on valve stem.
9. Remove the compressor and hit the valve with a soft faced hammer to be sure locks are in their correct position on the valve.10. Do Steps 1 through 4 again for the remainder of the valves.End By:a. install cylinder head assembly