CARRIAGE AS 5223816 - Caterpillar

Illustration 1 g01013992
Typical ET screen
Select the "Product ID" selection that is displayed on the "Configuration" screen.
Click on the "Change" button that is located on the "Configuration" screen. This will display a dialog box.
Illustration 2 g00827548
Enter the "Product ID" of the machine. The "Product ID" must have 8 digits. The "Product ID" must be formatted as 3 alphanumeric characters and 5 numbers for a total of 8 digits. Refer to item (4) in Illustration 3. Note: Use the "Product ID" of MSS99999 for Non-Caterpillar machines.Note: First Quarter 2001, the Caterpillar Product Identification Number (PIN) changed from 8 characters to 17 characters. The "Product ID" that is required by the Machine Security System is the last 8 digits. Refer to Item (4) in illustration 3.
Illustration 3 g00860618
(1) Caterpillar's World Manufacturing Code (characters 1 - 3)
(2) Machine description (characters 4 - 8)
(3) Check character (character 9)
(4) Machine Indicator Section (MIS) or Product Sequence Number (characters 10 - 17). These characters were previously referred to as the Serial Number.
Click on the "OK" button. This will cause the ET to display the following message.
Illustration 4 g00827549
Click on the "Yes" button in order to change the "Product ID". Or you can click on the "No" button to cancel the change of the "Product ID". If you enter an invalid "product ID", The ET will display the following message.
Illustration 5 g00827550