CARRIER 0008793 - Caterpillar

Rear Engine Shutdown Switch (If Equipped)
Turn the engine start switch key to OFF. If the engine does not stop, perform the following procedure.
Illustration 1 g01229598
Open the access panel for the engine shut off switch that is located on the right side of the machine.
Press this button in order to turn off the machine.Note: Do not operate the machine again until the malfunction has been corrected.No Rear Engine Shutdown Switch
If there is no Rear Engine Shutdown Switch, perform the following procedure. If turning the engine start switch to the OFF position does not stop the engine, perform the following procedure.
Apply the parking brake.
Lower all attachments to the ground.
Illustration 2 g02175770
Remove the fuse cover from the fuse block positioned behind the access door on the right side of the seat inside the cab
Illustration 3 g02175775
Remove the fuse for engine control in order to stop the engine, as shown.Note: Do not operate the machine again until the malfunction has been corrected.
Once the malfunction has been corrected, install the fuse for engine control and close the access door.