CARRIER 0031254 - Caterpillar

Installation Procedure
Table 1
Required Tools    
Tool    Part Number    Part Description    Qty    
A     189-0411     Shackle     2    
B     138-7575     Link Bracket     1    Note: The seat was removed for photographic reasons.
Illustration 1 g01198984
Install seals (24), (23), (22), and (21) .
Illustration 2 g01198983
Attach Tooling (B), Tooling (A), and a suitable lifting device to cab (13). Install cab (13). The weight of cab (13) is approximately 363 kg (800 lb).
Illustration 3 g01198317
Illustration 4 g01198316
Install bolts (14) and (12) and the washers on both sides of cab (13) .
Illustration 5 g01198144
Install the washers and bolts (11) into the cab mountings.
Illustration 6 g01198976
Connect harness assembly (20) and hose assembly (19) .
Illustration 7 g02160089
Install the washers and bolts (18) .
Illustration 8 g02160082
Reposition instrument panel (16). Install bolts (17) into the bottom of instrument panel (16). Install bolts (15) into the top of instrument panel (16) .
Illustration 9 g02160067
Position the console cover and install seals (8), electrical switch assembly (5), horn button (6), screws (7), armrest (10), and bolts (9) .
Illustration 10 g02160062
Position console covers (4) on both sides of the machine and install screws (3) .
Illustration 11 g01198141
Position both armrests (2) and install bolts (1) .End By: Install the rollover protective structure (ROPS). Refer to Disassembly and Assembly, "Rollover Protective Structure (ROPS) - Remove and Install".