CARRIER-PLANETARY 1059788 - Caterpillar

Illustration 2 g02436556Model number (A)____________________Machine PIN (B)____________________Service Information Plate (C)____________________Month and Year of Manufacture Plate (If Required) (D)____________________CE Plate (If Required) (E)Country of Origin Info Plate (If Required) (F)Local regulation may require documentation of the Month and/or Year of Manufacture in the Operation and Maintenance Manual. Comply with these regulations.Electromagnetic Emissions
Note: This label is on machines that are going into Canada.
Illustration 3 g06063443If equipped, this label is located next to the Pin plate. This label verifies that the product meets the requirements of ICES-002 Issue 6. Compliance to ICES-002 Issue 6 is accomplished by meeting electromagnetic emissions industry standard CISPR-12.Eurasian Economic Union
For machines compliant to the Eurasian Economic Union requirements, the EAC mark plate is positioned near the Product Identification Number (PIN) plate (see Product Information Section of the machine Operation and Maintenance Manual). The EAC mark plate is placed on machines certified to the Eurasian Economic Union requirements effective at the time of market entry.
Illustration 4 g06094564The Month and Year of Manufacture are on the PIN plate.Manufacturer Information
Manufacturer:Caterpillar Inc.,
100 N.E. Adams Street
Peoria, Illinois 61629, USA
Entity authorized by the manufacturer at the territory of Eurasian Economic Union:Caterpillar Eurasia LLC
75, Sadovnicheskaya Emb.
Moscow 115035, Russia
European Union
Illustration 5 g01880193This plate is positioned on the bottom left side of plate (1) for the PIN.Note: The CE plate is on machines that are certified to the European Union requirements that were effective at that time.For machines compliant to 2006/42/EC, the following information is stamped onto the CE plate. For quick reference, record this information in the spaces that are provided below.
Engine Power Primary Engine (kW)____________________
Engine Power for Additional Engine (If Equipped) ____________________
Typical Machine Operating Weight for European Market (kg)____________________
Year of Construction____________________
Machine Type ____________________For the name and the address of the manufacturer, and the country of origin of the machine, refer to the PIN plate.Serial Number Plates (SN)
Engine Serial Number
Illustration 6 g02927857Engine serial number plate (2) is on the left side of the engine.Transmission Serial Number
Illustration 7 g03237896Transmission serial number plate (3) is on the left side of the transmission.Suspension Cylinder Strut
The following information is stamped onto the suspension cylinder:
ACC. 200-4300 EC08
CAT INC. ITALY
SN: XXXXXXXXX
YEAR: XXXX
V: 4L
PS: 222 BAR
PT: 320 BAR
TS: -40C 50C
TEST DATE:
CE 0948Note: Make sure that all the information is legible. Clean the information if you cannot read the words.Certification
ROPS/FOPS Plate
These films are located inside the cab.
Structural damage, an overturn, modification, alteration, or improper repair can impair this structure's protection capability thereby voiding this certification. Do not weld on or drill holes in the structure. Consult a Caterpillar dealer to determine this structure's limitations without voiding its certification.
Illustration 8 g01294651This machine has been certified to the standards that are listed on the certification plate. The maximum mass of the machine, which includes the operator and the attachments without a payload, should not exceed the mass on the certification plate.Sound
Illustration 9 g01447432
A typical example of this film is shown. Your machine may have a different value.
A certification film is used to verify the environmental sound certification on machines that are certified to the European Union requirements. The value that is listed