CARRIER-PLANETARY 1128041 - Caterpillar

There may be several specific safety messages on an engine. The exact location of the hazards and the description of the hazards are reviewed in this section. Please become familiar with all warning signs.Ensure that all of the warning signs are legible. Clean the warning signs or replace the warning signs if the words cannot be read or if the pictures are not visible. When the warning signs are cleaned, use a cloth, water, and soap. Do not use solvent, gasoline, or other harsh chemicals to clean the warning signs. Solvents, gasoline, or harsh chemicals could loosen the adhesive that secures the warning signs. The warning signs that are loosened could drop off of the engine.Replace any damaged warning signs or missing warning signs. If a warning sign is attached to a part of the engine that is replaced, install a new warning sign on the replacement part. Any Caterpillar dealer can provide new warning signs.Do not work on the engine and do not operate the engine unless the instructions and warnings in the Operation and Maintenance Manual are understood. Correct care is your responsibility. Failure to follow the instructions or failure to heed the warnings could result in injury or in death.The warning labels that may be found on the engine are illustrated.
Illustration 1 g01324126
(A) Location of the warning labels
(1) C0.5
(2) C0.7
(3) C1.1
(4) C1.5
(5) C1.6
(6) C2.2
Illustration 2 g01324528
(B) Location of ether warning labels
(1) C0.5
(2) C0.7
(3) C1.1
(4) C1.5
(5) C1.6
(6) C2.2 Universal Warning (A)
Illustration 3 g01154807Warning label (A) is installed in different locations. The location will change according to the physical size of the engine. Refer to illustration 1 for the location of the warning labels.
Do not operate or work on this equipment unless you have read and understand the instructions and warnings in the Operation and Maintenance Manuals. Failure to follow the instructions or heed the warnings could result in serious injury or death.
No Ether (B)
Illustration 4 g01324227Warning label (B) is installed in different locations. The location will change according to the physical size of the engine. Refer to illustration 2 for the location of the warning labels.
Do not use aerosol types of starting aids such as ether. Such use could result in an explosion and personal injury.