1143585 CARRIER AS Caterpillar parts
933C, D3C III, D3G, D4C III, D4G
Rating:
Alternative (cross code) number:
CA1143585
114-3585
1143585
CA1143585
114-3585
1143585
Weight: 130 pounds 58 kg.
TRACK LOADER, TRACK-TYPE TRACTOR,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
GY6 CVK Main Jet
Universal Parts Main Jet, CVK for 150cc and 125cc GY6 carburetors. Please select jet size #100 - #180 from the drop || down menu. High Quality, Made in Taiwan! Select Sizes on Clearance: 101, 109, 113, 119, 127, 129, 13 || 1, 132, 133, 134, 136, 137, 139, 141, 143, 147, 153, 157, 159, 161, 162, 163, 164, 166, 167, 168, 16
Universal Parts Main Jet, CVK for 150cc and 125cc GY6 carburetors. Please select jet size #100 - #180 from the drop || down menu. High Quality, Made in Taiwan! Select Sizes on Clearance: 101, 109, 113, 119, 127, 129, 13 || 1, 132, 133, 134, 136, 137, 139, 141, 143, 147, 153, 157, 159, 161, 162, 163, 164, 166, 167, 168, 16
$11.99
26 Jun 2024
US: ScootsUSA - Sup
GY6 CVK Main Jet
Universal Parts Main Jet, CVK for 150cc and 125cc GY6 carburetors. Please select jet size #100 - #180 from the drop || down menu. High Quality, Made in Taiwan! Select Sizes on Clearance: 101, 109, 113, 119, 127, 129, 13 || 1, 132, 133, 134, 136, 137, 139, 141, 143, 147, 153, 157, 159, 161, 162, 163, 164, 166, 167, 168, 16
Universal Parts Main Jet, CVK for 150cc and 125cc GY6 carburetors. Please select jet size #100 - #180 from the drop || down menu. High Quality, Made in Taiwan! Select Sizes on Clearance: 101, 109, 113, 119, 127, 129, 13 || 1, 132, 133, 134, 136, 137, 139, 141, 143, 147, 153, 157, 159, 161, 162, 163, 164, 166, 167, 168, 16
$14.20
30 Jan 2024
0.1[0.05] pounds
US: ScootsUSA - Sup
GY6 CVK Main Jet
Universal Parts Main Jet, CVK for 150cc and 125cc GY6 carburetors. Please select jet size #100 - #180 from the drop || down menu. High Quality, Made in Taiwan! Select Sizes on Clearance: 101, 109, 113, 119, 127, 129, 13 || 1, 132, 133, 134, 136, 137, 139, 141, 143, 147, 153, 157, 159, 161, 162, 163, 164, 166, 167, 168, 16
Universal Parts Main Jet, CVK for 150cc and 125cc GY6 carburetors. Please select jet size #100 - #180 from the drop || down menu. High Quality, Made in Taiwan! Select Sizes on Clearance: 101, 109, 113, 119, 127, 129, 13 || 1, 132, 133, 134, 136, 137, 139, 141, 143, 147, 153, 157, 159, 161, 162, 163, 164, 166, 167, 168, 16
This part in 4 request:
Show.
This information for suppliers only!
2023-12-18
2022-11-11
2021-07-12
2020-07-12
Number on catalog scheme:
29
For full view, you need register
Compatible equipment models: 1143585:
Information:
Filters
Note: Initial Oil Filter Change - Change the transmission oil filter after the initial 100 service hours. The transmission oil does not need to be changed at this time.
Hot oil and hot components can cause personal injury. Do not allow hot oil or hot components to contact the skin.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g06162568
(1) Filter base
(2) Filter housing
(3) Filter drain plug
Remove filter drain plug (3). Allow the oil to drain into a suitable container. Replace filter drain plug (3). Tighten to 40 6 N m (30 5 lb ft).
Remove oil filter housing (2). Discard the used oil filter element that is inside of housing (2). Additional oil will drain when you remove the filter. Allow the oil to drain into a suitable container.Note: A center tube is fixed into the closed end of the filter housing and should NOT be removed during element service. If the tube is removed, conservatively apply Loctite 270 or Loctite 263 to the threads of the tube and reinstall into the filter housing. Torque the tube to 20 2 N m (15 1.5 lb ft)
A new seal for housing (2) is provided with the filter element. Replacement of the seal is recommended.
Install the new oil filter element in the housing (2).
Install housing (2) and the new element into filter base (1). Tighten the housing to 50 5 N m (37 4 lb ft). Do not use an air wrench to tighten.
Make sure that the transmission is in NEUTRAL. Start the engine and operate the engine at low idle. Check for any leaks and make the necessary repairs.
Illustration 2 g06162572
(4) Filler Tube and Dipstick
Remove dipstick (4) and check the oil level when the oil is warm and the transmission is in the NEUTRAL position.
Stop the engine. If necessary, add oil.
Install the dipstick.
Note: Initial Oil Filter Change - Change the transmission oil filter after the initial 100 service hours. The transmission oil does not need to be changed at this time.
Hot oil and hot components can cause personal injury. Do not allow hot oil or hot components to contact the skin.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g06162568
(1) Filter base
(2) Filter housing
(3) Filter drain plug
Remove filter drain plug (3). Allow the oil to drain into a suitable container. Replace filter drain plug (3). Tighten to 40 6 N m (30 5 lb ft).
Remove oil filter housing (2). Discard the used oil filter element that is inside of housing (2). Additional oil will drain when you remove the filter. Allow the oil to drain into a suitable container.Note: A center tube is fixed into the closed end of the filter housing and should NOT be removed during element service. If the tube is removed, conservatively apply Loctite 270 or Loctite 263 to the threads of the tube and reinstall into the filter housing. Torque the tube to 20 2 N m (15 1.5 lb ft)
A new seal for housing (2) is provided with the filter element. Replacement of the seal is recommended.
Install the new oil filter element in the housing (2).
Install housing (2) and the new element into filter base (1). Tighten the housing to 50 5 N m (37 4 lb ft). Do not use an air wrench to tighten.
Make sure that the transmission is in NEUTRAL. Start the engine and operate the engine at low idle. Check for any leaks and make the necessary repairs.
Illustration 2 g06162572
(4) Filler Tube and Dipstick
Remove dipstick (4) and check the oil level when the oil is warm and the transmission is in the NEUTRAL position.
Stop the engine. If necessary, add oil.
Install the dipstick.
Caterpillar parts catalog:
Parts carrier Caterpillar catalog:
2036632
CARRIER-BEARING
D3G, D3K XL, D3K2 LGP, D4G, D4K XL, D4K2 XL, D5G, D5K LGP, D5K2 XL, D6K LGP
D3G, D3K XL, D3K2 LGP, D4G, D4K XL, D4K2 XL, D5G, D5K LGP, D5K2 XL, D6K LGP
2036629
CARRIER-PLANETARY
D3G, D3K XL, D3K2 LGP, D4G, D4K XL, D4K2 XL, D5G, D5K LGP, D5K2 XL, D6K LGP
D3G, D3K XL, D3K2 LGP, D4G, D4K XL, D4K2 XL, D5G, D5K LGP, D5K2 XL, D6K LGP
1276334
CARRIER AS
963C
963C
1394072
CARRIER AS
963C
963C
572G, D6C, D6D, D6E, D6G, D6G2 LGP, D6G2 XL, D7F, D7G, D7G2
572G, D6C, D6D, D6E, D6G, D6G2 LGP, D6G2 XL, D7F, D7G, D7G2
14E, 572G, 977K, 977L, D6C, D6D, D6E, D6G, D6G2 LGP, D6G2 XL, D7F, D7G, D7G2
14E, 572G, 977K, D6C, D6D, D6E, D6G, D6G2 LGP, D6G2 XL, D7F, D7G, D7G2
2166371
CARRIER
D5R LGP, D6N, D6N LGP, D6N OEM, D6R, D6R II, D6R III, D6R STD, D6T, D6T LGP, D6T LGPPAT, D6T XL
D5R LGP, D6N, D6N LGP, D6N OEM, D6R, D6R II, D6R III, D6R STD, D6T, D6T LGP, D6T LGPPAT, D6T XL
583R, 587R, D8R
572R, 572R II, 583R, 583T, 587R, 587T, D7H, D7R, D7R II, D7R XR, D8N, D8R, D8R II, D8T, PL83, PL87
1143456
CARRIER-PLANETARY
561H, 561M, 561N, PL61
561H, 561M, 561N, PL61
1065795
CARRIER
561H, 561M, 561N, PL61
561H, 561M, 561N, PL61
1139776
CARRIER AS
939C, D5C III, D5G
939C, D5C III, D5G