CARRIER 1184257 - Caterpillar

When Required
Engine Air Intake System - Service filters Ether Starting Aid (If Equipped) - Replace cylinder Fuses and Circuit Breaker - Replace/reset Windshield Wipers and Washer - Inspect/replace Bucket Tips and Side Cutters - Replace if damaged Electric Fuel Refueling Pump (If Equipped) - Clean strainer Oil Filter Inspection Bucket Clearance - Inspect/adjust Cab Air Filter - Clean Cab Heater/Air Conditioner (If Equipped) - Clean air filter element Tracks - Check/adjust Boom Base - Lubricate the fitting when boom linkage pin is replacedEvery 10 Service Hours or Daily
Engine Crankcase Oil - Check oil level Hydraulic Tank Oil - Check oil level Radiator - Check coolant level, clean core Water Separator (If Equipped) - Check level Fuel Tank - Drain water and sediment Walk-Around Inspection - Inspect machine Seat Belt - Inspect Undercarriage - Check for oil leaks, wear and loose bolts Indicators and Gauges - Test Travel Alarm (If Equipped) - Test Backhoe Linkage - Lubricate under severe operating condition, etc.Every 50 Service Hours or Weekly *
Backhoe Linkage - Lubricate the fittingsInitial 250 Service Hours *
Hydraulic System - Service screen and filters Swing Drive - Change oil Final Drives - Change oilEvery 250 Service Hours or Monthly *
Scheduled Oil Sampling (S O S) - Obtain engine oil sample Engine Oil and Filter - Change oil and filter. If the sulfur content in the fuel is greater than 1.5% by weight, use an oil with a TBN of 30 and reduce the oil change interval by one half Hydraulic System - Obtain hydraulic oil sample on machines equipped with hammers and perform S O S and Infrared Analysis Fuel System - Change secondary filter Cooling System Hoses - Inspect/check Cooling System - Add coolant additive Belts - Inspect/adjust Final Drives - Check oil level Swing Drive - Check oil level Swing Bearing - Lubricate the fittings Air Conditioner (If Equipped) - Check amount of refrigerant, Inspect/clean condenserEvery 500 Service Hours or 3 Months *
Schedule Oil Sampling(S O S) - Obtain hydraulic oil samples from final drives and swing drive Hydraulic System - Service screen and filters Fuel System - Wash primary element Fuel Tank Cap and Fill Screen - Clean screen, replace filter Engine Crankcase Breather - CleanEvery 1000 Service Hours or 6 Months *
Swing Drive - Change oil Batteries - CheckEvery 2000 Service Hours or 1 Year *
Final Drives - Change oil Hydraulic System - Change oil and screen Engine Valve Lash and Injector Fuel Timing - Adjust Swing Gear - Add grease Governor - Clean/Replace screenEvery 3000 Service Hours or 2 Years *
Cooling System Coolant - Change coolant*First Perform Previous Service Hours Items