CARRIER 1403134 - Caterpillar

Illustration 35 g01121498
Illustration 36 g01121497
Position pad assembly (26) and install bolts (25). The clearance for pad assembly (26) must not exceed 1.5 mm (0.06 inch) after the boom assembly is installed. Repeat for the opposite side.
Illustration 37 g01121496
Position pulley (23). Install pin assembly (22) and bolt (24) .
Illustration 38 g01121874
Attach a suitable lifting device to boom assembly (11). Attach Tooling (A) to frame assembly (10) and boom assembly (11). Connect Tooling (B) to Tooling (A) .
Illustration 39 g01121473
Position cover (20). Apply Tooling (L) to bolts (19) and install bolts (19) .
Illustration 40 g01121470
Position pad assembly (17) and install bolts (18). The clearance of pad assemblies (17) must not exceed 1.5 mm (0.06 inch) after the boom assembly is installed. Repeat for the opposite side.
Illustration 41 g01121465
Position guide (16) and install screws (15).
Illustration 42 g01121458
Position chain assembly (14). Install pin (13) and cotter pin (12) .
Illustration 43 g01121904
Remove Tooling (A) and (B) .
Illustration 44 g01121450
Install bolts (9). Connect harness assembly (8). Connect hose assemblies (7).
Illustration 45 g01121448
Install cover (6) .
Illustration 46 g01121423
Position chain assembly (5). Apply Tooling (L) to nuts (4) and install nuts (4). Tighten nuts (4) to a torque of 80 5 N m (59 4 lb ft).
Illustration 47 g01121422
Position chain assembly (2). Apply Tooling (L) to nuts (3) and install nuts (3). Tighten nuts (3) to a torque of 120 5 N m (89 4 lb ft). Repeat for the opposite side.
Illustration 48 g01121921
Position suitable blocking under boom assembly (72) .
Illustration 49 g01121932
Apply Tooling (L) to nuts (80). Tighten nuts (80) to a torque of 120 5 N m (89 4 lb ft). Apply Tooling (L) to nuts (67). Tighten nuts (67) to a torque of 80 5 N m (59 4 lb ft).