1484749 CARRIER-PLANETARY Caterpillar parts
315C, 318B
Rating:
Alternative (cross code) number:
CA1484749
148-4749
1484749
CA1484749
148-4749
1484749
Weight: 14 pounds 6 kg.
EXCAVATOR,
Number on catalog scheme:
39G
For full view, you need register
Information:
Illustration 9 g02424802
Install Plate (1) With Bushing (7) and Bolt (8) .
Select two or three hole locations and install 188-3915 Bushings (7) and 8T-4186 Bolt (8) to fasten the drilling plate to the cylinder head. In some cases, the exhaust stud and a nut can be used in place of the M10 bolts.Note: Due to the large number of holes in the drilling plate, the holes are not marked for specific bolt locations and some adjacent studs must be removed to provide clearance for the plate. On 3126B cylinder heads, the small allen head plugs must be removed to allow the plate to sit flush on the cylinder head. If the plugs are removed, discard the O-rings and replace them with new O-rings.
Illustration 10 g02424803
Make Sure Fastener is Centered in Hole.
Make sure the fastener being removed is centered in the hole of the drilling plate.
The exhaust manifold fasteners are taper lock studs. These studs normally do not have a large air space between the end of the stud and the bottom of the hole. It is important to check the depth of an adjacent hole to set the drill depth. Drilling too deep will cause cylinder head damage.
Illustration 11 g02424804
Check Depth of Adjacent Hole and Mark Depth on Drill Bit.
Check the depth of the hole using an identical hole and mark 1U-8133 Drill Bit (6) to avoid drilling too deep.
Illustration 12 g02424805
Install Drill Bushing (6) with Lock Screw (2) .
Install 188-3918 Bushing (6) in the drilling plate and secure it with a 188-3915 Bushing Screw (2) .
Illustration 13 g02424806
Drill Pilot Hole with Drill Bit (4) .
Drill a pilot hole in the broken stud with 1U-8133 Drill Bit (4) .
Illustration 14 g02424807
Check the depth of the hole of an adjacent hole and mark 1U-8163 Drill Bit (3) to avoid drilling too deep.
Illustration 15 g02424808
Install Drill Bushing (5) with Lock Screw (2) .
Install 188-3923 Bushing (5) and bushing lock screw (2) .
Illustration 16 g02424809
Drill Out Broken Fastener with Drill Bit (3) .
Install 188-3923 Bushing (5) and bushing lock screw (2) .
Illustration 17 g02424810
Use a pick or other suitable device to remove any remaining metal chips.
Illustration 18 g02435361
Illustration 19 g02424811
Using a tap, recondition the threads.
Illustration 20 g02435360
Clean the threaded hole to remove all debris.
Caterpillar parts catalog:
Parts carrier Caterpillar catalog:
1089188
CARRIER AS
311, 311B, 312, 312B, 312B L, 313B, 315, 315B, 315B FM L, 315B L, 315C, 317, 317B LN, 318B
311, 311B, 312, 312B, 312B L, 313B, 315, 315B, 315B FM L, 315B L, 315C, 317, 317B LN, 318B
1484750
CARRIER AS
315C, 318B
315C, 318B
7I7785
CARRIER-PLANETARY
311, 311B, 312, 312B, 312B L, 315C, 318B
311, 311B, 312, 312B, 312B L, 315C, 318B
1550173
CARRIER GP
315B L, 317B LN, 318B
315B L, 317B LN, 318B
315C, 315D L, 318B, 318C, 318E L, 319C, 319D, 319D L, 319D LN, 320 L, 320B, 320C, 320C FM, 320C L, 320D, 320D FM, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 320D2, 320D2 GC, 320D2 L, 320E, 320E L, 3...
315C, 315D L, 318B, 318C, 318E L, 319C, 319D, 319D L, 319D LN, 320 L, 320B, 320C, 320C FM, 320C L, 320D, 320D FM, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 320D2, 320D2 GC, 320D2 L, 320E, 320E L, 3...
1582457
CARRIER GP
317B LN, 318B
317B LN, 318B
1912599
CARRIER-PLANETARY
311C, 311D LRR, 312C, 312C L, 312D, 312D L, 314C, 314D CR, 314D LCR, 315C, 315D L, 318D L
311C, 311D LRR, 312C, 312C L, 312D, 312D L, 314C, 314D CR, 314D LCR, 315C, 315D L, 318D L
311C, 313D2 LGP, 315C, 315D L, 316E L, 318D L, 318D2 L
311C, 313D2 LGP, 315C, 315D L, 316E L, 318D L, 318D2 L
1994624
CARRIER-PLANETARY
315C, 315D L, 318D L
315C, 315D L, 318D L
1582457
CARRIER GP
317B LN, 318B
317B LN, 318B
315C, 315D L, 318B, 318C, 318E L, 319C, 319D, 319D L, 319D LN, 320 L, 320B, 320C, 320C FM, 320C L, 320D, 320D FM, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 320D2, 320D2 GC, 320D2 L, 320E, 320E L, 3...
315C, 315D L, 318B, 318C, 318E L, 319C, 319D, 319D L, 319D LN, 320 L, 320B, 320C, 320C FM, 320C L, 320D, 320D FM, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 320D2, 320D2 GC, 320D2 L, 320E, 320E L, 3...
1550173
CARRIER GP
315B L, 317B LN, 318B
315B L, 317B LN, 318B
1550169
CARRIER GP-PLANETARY
315B L
315B L
M318, M318C, M318C MH, M318D, M318D MH, M320, M322C, M322D, M322D MH
3074161
CARRIER
307C, 307D, 308C, 308D, 308E, 308E CR, 308E SR
307C, 307D, 308C, 308D, 308E, 308E CR, 308E SR
1938429
CARRIER
304.5
304.5
1938428
CARRIER
304.5
304.5
2069479
CARRIER AS
302.5, 302.5C
302.5, 302.5C
1550836
CARRIER-PLANETARY
M312, M313C, M313D, M315, M315C, M315D, M315D 2, M316C, M316D, M317D 2
M312, M313C, M313D, M315, M315C, M315D, M315D 2, M316C, M316D, M317D 2
1550823
CARRIER
M312, M313C, M313D, M315, M315C, M315D, M315D 2, M316C, M316D, M317D 2
M312, M313C, M313D, M315, M315C, M315D, M315D 2, M316C, M316D, M317D 2