CARRIER-PLANETARY 1983880 - Caterpillar

Install O-ring seal (33), spring (32), cone (31), and plug (30). Tighten plug (30) to a torque of 120 N m (89 lb ft).
Illustration 3 g01192547
Install spring (28) and plug (29). Tighten plug (29) to a torque of 200 N m (148 lb ft).
Illustration 4 g01192544
Improper assembly of parts that are spring loaded can cause bodily injury.To prevent possible injury, follow the established assembly procedure and wear protective equipment.
Install plate assembly (25), O-ring seal (27), and bolts (26). Tighten bolts (26) to a torque of 10.4 N m (92 lb in).
Illustration 5 g01192543
Install cartridge (21). Install plugs (22), (23), and (24). Tighten plug (22) to a torque of 60 N m (44 lb ft). Tighten plug (23) to a torque of 45 N m (33 lb ft). Tighten plug (24) to a torque of 80 N m (59 lb ft).
Illustration 6 g01192542
Install spool (20) and nut (19). Tighten nut (19) to a torque of 80 N m (59 lb ft).
Illustration 7 g01192539
Install spring (15) and O-ring seal (16) to plug (13) .
Illustration 8 g01192540
Install spring (17) and O-ring seal (18) to plug (14) .
Illustration 9 g01192538
Improper assembly of parts that are spring loaded can cause bodily injury.To prevent possible injury, follow the established assembly procedure and wear protective equipment.
Install plugs (13) and (14). Tighten plug (13) to a torque of 80 N m (59 lb ft). Tighten plug (14) to a torque of 90 N m (66 lb ft).
Illustration 10 g01192537
Install backup ring (11) and O-ring seals (12) to makeup valve (7) .
Illustration 11 g01192536
Install retainer (10), spool (9), plug (8), and makeup valve (7). Tighten makeup valve (7) to a torque of 100 N m (74 lb ft). Tighten plug (8) to a torque of 45 N m (33 lb ft).
Illustration 12 g01192535
Install solenoid valve (3), spring (6), and O-ring seals (4) and (5). Tighten solenoid valve (3) to a torque of 12 5 N m (106 44 lb in).
Illustration 13 g01192533
Improper assembly of parts that are spring loaded can cause bodily injury.To prevent possible injury, follow the established assembly procedure and wear protective equipment.
Install actuator (2) and bolts (1). Tighten bolts (1) to a torque of 10.4 N m (92 lb in).End By: Install the control valve (hydraulic generator). Refer to Disassembly and Assembly, "Control Valve (Hydraulic Generator) - Install".