CARRIER 1T0213 - Caterpillar

Manual Shifting
Move the autoshift switch fully counterclockwise into the MANUAL position. Depressing the left service brake pedal will cause the transmission to downshift. If the transmission neutralizer has not been disabled, the transmission will also neutralize as the machine slows down.The operator must use the transmission speed selector in order to change transmission speeds.Automatic Shifting (Command Control Steering)
Illustration 1 g02845896
Autoshift Selector with Command Control Steering
Move the autoshift switch into one of the four automatic positions.When the autoshift switch is in 2-4 position, the lowest automatic speed for the transmission is SECOND speed. Press downshift button to get to FIRST speed. When the autoshift switch is in 1-2, 1-3, or 1-4 position, the lowest automatic speed for the transmission is FIRST speed. The transmission will shift into SECOND after a change in direction if the maximum gear is equal to or greater than second gear. Then the transmission will shift automatically according to machine conditions.Depressing the left service brake pedal will cause the transmission to downshift. If the transmission neutralizer has not been disabled, the transmission will also neutralize. Fully releasing the left service brake pedal will allow the machine to return to automatic shifting.Automatic Shifting (Conventional Steering)
Illustration 2 g02845897
Autoshift Selector with Conventional Steering
Move the autoshift switch into one of the two automatic positions.When the autoshift switch is in 2-4 position, the lowest automatic speed for the transmission is SECOND speed. Press downshift button to get to FIRST speed. When the autoshift switch is in 1-4 position, the lowest automatic speed for the transmission is FIRST speed. The transmission will shift into SECOND after a change in direction if the maximum gear is equal to or greater than second gear. Then the transmission will shift automatically according to machine conditions. Depressing the left service brake pedal will cause the transmission to downshift. If the transmission neutralizer has not been disabled, the transmission will also neutralize. Fully release the left service brake pedal in order to return to automatic shifting.Downshifting (Command Control Steering)
Illustration 3 g00888840
Transmission speed selector with command control steering
Manual Shifting
Press the bottom of the transmission speed selector that is located on the left side of the steering wheel in order to downshift the transmission. The transmission speed selector can be used to downshift from SECOND to FIRST in order to load the bucket. The transmission will shift into FIRST speed in order to back away from the pile.Automatic Shifting
The transmission speed selector is located on the left side of the steering wheel. Press the bottom of the transmission speed selector in order to downshift the transmission. The transmission speed selector can be used to downshift from SECOND to FIRST in order to load the bucket. The machine will remain in FIRST speed until either the machine changes direction or the operator manually upshifts the machine. Note: The transmission will only downshift if an engine overspeed will not occur. Downshifting (Conventional Steering)
Illustration 4 g01136837
Downshift Switch for Machines That are Equipped with a Joystick
Illustration 5 g03351906
Downshift Switch for Machines that are Equipped With Levers
Manual Shifting
The