1T0742 CARRIER Caterpillar parts
D5
Rating:
Alternative (cross code) number:
CA1T0742
1T-0742
1T0742
CA1T0742
1T-0742
1T0742
Weight: 0.05 pounds 0 kg.
TRACK-TYPE TRACTOR,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
$131.09
19 Jan 2023
US: Florida-Parts-Z
1T0945 - Carrier 1T0742 fit Caterpillar (CAT)
FIRST PRICE PARTS
FIRST PRICE PARTS
Number on catalog scheme:
25
For full view, you need register
Compatible equipment models: 1T0742:
Information:
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 9U-7257 Cradle 1
B 9U-7256 Guide 1
C 9U-7225 Camshaft Pilot 2
D 9U-7240 Camshaft Hook 2
E 9U-7243 Alignment Sleeve 1
F 8T-2998 Lubricant -
G - Loctite 242 Threadlocker Medium Strength, Blue - Start By:
Remove the camshaft gear.
Remove the rocker arms and shafts.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Do not turn the crankshaft or the camshaft while the camshaft gear is removed. If the front gear group is not correctly timed during installation, interference can occur between the pistons and the valves, resulting in damage to the engine.
Illustration 1 g01056681
Remove bolts (2) and thrust plate (1) .
Illustration 2 g01071487
Remove sealing plate (3) from the front housing. Remove adapter assembly (4) from the crankshaft.
Illustration 3 g01056684
Remove O-ring seal (5) and O-ring seal (6) from sealing plate (3) .
Care must be used when removing or installing the camshaft. Do not damage the finished surfaces of the camshaft or the camshaft bearings.
Illustration 4 g01056704
Use the bolts for the rocker arm shaft assembly to install Tooling (A) at Location (Y) .
Illustration 5 g01047945
Install Tooling (B) on front housing (7). Tooling (B) is used to support camshaft (8). Do not tighten the bolts for Tooling (B) at this time.
Illustration 6 g01056675
Remove flat head screws (9) and cover (10). Remove the O-ring seal from the cover.
Illustration 7 g01047961
Table 1
Required Tools
Tool Part Number Part Description Qty
A 9U-7257 Cradle 1
B 9U-7256 Guide 1
C 9U-7225 Camshaft Pilot 2
D 9U-7240 Camshaft Hook 2
E 9U-7243 Alignment Sleeve 1
F 8T-2998 Lubricant -
G - Loctite 242 Threadlocker Medium Strength, Blue - Start By:
Remove the camshaft gear.
Remove the rocker arms and shafts.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Do not turn the crankshaft or the camshaft while the camshaft gear is removed. If the front gear group is not correctly timed during installation, interference can occur between the pistons and the valves, resulting in damage to the engine.
Illustration 1 g01056681
Remove bolts (2) and thrust plate (1) .
Illustration 2 g01071487
Remove sealing plate (3) from the front housing. Remove adapter assembly (4) from the crankshaft.
Illustration 3 g01056684
Remove O-ring seal (5) and O-ring seal (6) from sealing plate (3) .
Care must be used when removing or installing the camshaft. Do not damage the finished surfaces of the camshaft or the camshaft bearings.
Illustration 4 g01056704
Use the bolts for the rocker arm shaft assembly to install Tooling (A) at Location (Y) .
Illustration 5 g01047945
Install Tooling (B) on front housing (7). Tooling (B) is used to support camshaft (8). Do not tighten the bolts for Tooling (B) at this time.
Illustration 6 g01056675
Remove flat head screws (9) and cover (10). Remove the O-ring seal from the cover.
Illustration 7 g01047961
Caterpillar parts catalog:
Parts carrier Caterpillar catalog:
572G, 572R, 578, 583R, 627, 627B, 977H, 988, D5, D5B, D6C, D6D, D6H, D6H XL, D6H XR, D6R, D7F, D7G, D7H, D7R, D8N, D8R
D5, D5B
D5, D5B
D8H, D8K, D9H
D8K, D9H
D8K
8S3481
CARRIER
594, D8H, D9G
594, D8H, D9G
594, D9G
D6C
518, 920, 941, 951B, D4D
955K, 955L
594H, D8H, D8K, D9G, D9H
977K, 977L, 983, 983B