CARRIER-STATOR 1T1437 - Caterpillar

Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Note: Check the O-ring seals, the gaskets, and the seals for wear or for damage. Replace the components, if necessary.
Illustration 1 g01369844
Position clean gas induction valve (13) and install bolts (14) .
Illustration 2 g01369838
Install hoses (12) .
Illustration 3 g01369813
Position tube assembly (11) and install clamps (9). Tighten clamps (9) to a torque of 12 2 N m (106 18 lb in).
Install hose (10) .
Illustration 4 g01369787
Position tube assembly (7) and install bolts (8) .
Connect tube assemblies (6) .
Illustration 5 g01369774
Install clamp (1) and connect tube assembly (2) .
Install tube assembly (3) .
Connect harness assemblies (5) .
Connect tube assemblies (4) .