CARRIER-CLUTCH 1T1554 - Caterpillar

Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 477-8634 Load Leveler 1
Fuel leaked or spilled onto hot surfaces or electrical components can cause a fire.Turn the disconnect switch OFF when draining and/or removing any fuel system components.
Illustration 1 g06088129
Fuel leaked or spilled onto hot surfaces or electrical components can cause a fire.Turn the disconnect switch OFF when draining and/or removing any fuel system components.
Open ball valve (1) to allow fuel to drain into suitable container.
Close ball valve (1) and disconnect hose assemblies (2).
Disconnect harness assembly (3).
Illustration 2 g06088458
Disconnect harness assembly (6).
Remove bolts (4) and (7). Remove light assembly (5).
Repeat Steps 5 for the opposite side.
Illustration 3 g06088471
Illustration 4 g06088972
Attach Tooling (A) and a suitable lifting device to fuel tank (9). The weight of fuel tank (9) is approximately 272 kg (600 lb).
Remove mounting bolts (10) and fuel tank (9).Installation Procedure
Install fuel tank (9) in the reverse order of removal.