CARRIER-PLANETARY 2006387 - Caterpillar

Illustration 18 g06175465
Illustration 19 g06172761
Install gear (23) and retaining ring (24) onto carrier assembly (18).
Illustration 20 g06175466
Install gears (22) and retaining rings (21) onto the carrier assembly.
Illustration 21 g06172755
Install gear (17) and retaining ring (19) onto shaft (20).
Illustration 22 g06172753
Install carrier assembly (18) and gear (17).
Illustration 23 g06172748
Install O-ring seal (16) onto gear (15).
Illustration 24 g06172743
Install gear (15), bolts (14), and O-ring seal (13).
Illustration 25 g06172653
Install cover (11) and bolts (10).
Remove the final drive from Tooling (C) or a suitable bench. The weight of the final drive is approximately 110 kg (243 lb).
Illustration 26 g06172742
Install backup rings (8) and O-ring seals (9).
Illustration 27 g06172740
Install discs (7) and the shims.
Illustration 28 g06175467
Install piston (6) and springs (5).
Illustration 29 g06172716
Install plate (4).
Illustration 30 g06172710
Illustration 31 g06172670
Improper assembly of parts that are spring loaded can cause bodily injury.To prevent possible injury, follow the established assembly procedure and wear protective equipment.
Use Tooling (A) to compress the plate to retaining ring (3).
Install retaining ring (3).
Release pressure from Tooling (A). Remove Tooling (A).
Install flange (2), the O-ring seal, and bolts (1).End By:
Refill the final drive planetary. Refer to Operation and Maintenance Manual for "Lubricant Viscosities" and "Capacities (Refill)".
Install the final drive planetary. Refer to Disassembly and Assembly, Final Drive Planetary (Drum Propel) - Remove and Install in this manual.