CARRIER-SEAL 3179747 - Caterpillar

Removal Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products.Dispose of all fluids according to local regulations and mandates.
Drain the cooling system coolant into a suitable container for storage or disposal.
Illustration 1 g00915172
Remove clamp (1). Disconnect hose assembly (2). Remove bolts (3) from the flange. Remove tube assembly (4).
Illustration 2 g00915174
Remove clamp (5).
Illustration 3 g00914993
Remove bolts (6) from flange (7).
Install a suitable lifting device to the engine oil cooler.
Illustration 4 g00915012
Remove mount bolts (8) from the rear of the engine oil cooler.
Illustration 5 g00915021
Remove mount bolts (9).
Illustration 6 g00915024
Slide the engine oil cooler out of tube assembly (10).
Illustration 7 g00916150
Remove engine oil cooler (11). The weight of engine oil cooler (11) is approximately 95 kg (210 lb).