CARRIER AS 3207250 - Caterpillar

Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 504-9791 Lift Gp (60Hz)(1) 2
OR
504-9793 Lift Gp (50Hz)(2) 2
B 1U-9204 Lever Puller Hoist 1
(1) High-Voltage (480v) Low-Voltage (240V)
(2) High-Voltage (400V) Low-Voltage (200V)
Illustration 1 g01315978
Illustration 2 g01315977
Attach Tooling (B) and a suitable lifting device to track roller frame (4). The weight of track roller frame (4) is approximately 1950 kg (4300 lb).
Install track roller frame (4).
Illustration 3 g01315971
Install cap (8) and bolts (7).
Illustration 4 g01315969
Install cap (6) and bolts (5) .
Illustration 5 g01315968
Install guards (2) and (3).
Illustration 6 g01315967
Connect the track master link (1). Refer to Disassembly and Assembly, "Track - Connect".
Illustration 7 g06303768
Position Tooling (A) to rear of the machine.
Illustration 8 g06303773
Use Tooling (A) to lower the side of the machine. Refer to Tool Operating Manual, NEHS1303, "Lift Group (Stand - 25 Ton)" for more information on Tooling (A)End By:
Install the blade and the push arms. Refer to Disassembly and Assembly, "Push Arms and Blade - Install".