CARRIER- 3207325 - Caterpillar

Removal Procedure
Start By:
Release the hydraulic system oil.
Retain the hydraulic tank oil.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products.Dispose of all fluids according to local regulations and mandates.
Personal injury can result from hydraulic oil pressure and hot oil.Hydraulic oil pressure can remain in the hydraulic system after the engine has been stopped. Serious injury can be caused if this pressure is not released before any service is done on the hydraulic system.Make sure all of the attachments have been lowered, oil is cool before removing any components or lines. Remove the oil filler cap only when the engine is stopped, and the filler cap is cool enough to touch with your bare hand.
Turn the battery disconnect switch to the OFF position.
Illustration 1 g03712421
Typical Example
Disconnect hose assemblies (1) and (4).
Remove bolts (2) and the washers. Remove hydraulic oil cooler (3). Installation Procedure
Install hydraulic oil cooler (3) in the reverse order of removal.