CARRIER-RING 3P3103 - Caterpillar

Installation Procedure
Table 1
Required Tools    
Tool     Part Number     Part Description     Qty    
A     138-7573     Link Bracket     2    
B     5P-3931     Anti-Seize Compound     -    
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Note: Refer to Disassembly and Assembly, "General Information (Reference Material)" for more information.
Illustration 1 g01306162
Attach Tooling (A) and a suitable lifting device to turbocharger (9). The weight of turbocharger (9) is approximately 400 kg (880 lb). Install turbocharger (9) and install bolts (10) that hold turbocharger (9) to the support. Tighten bolts (10) to a torque of 475 60 N m (350 44 lb ft).
Illustration 2 g01306156
Apply Tooling (B) to bolts (7). Place a new gasket between elbow (8) and the turbocharger. Connect elbow (8) to the turbocharger and install bolts (7) .
Illustration 3 g01306154
Apply Tooling (B) to bolts (6). Install the gasket between bellows (5) on the exhaust manifold and the turbocharger. Connect bellows (5) to the turbocharger and install bolts (6). Tighten bolts (6) to a torque of 135 20 N m (100 15 lb ft).
Illustration 4 g01306006
Install the gasket and connect oil drain tube assembly (4) .
Install the O-ring seal and install oil supply tube assembly (3) .
Illustration 5 g01305999
Install the gasket and connect tube assembly (2) .
Install tube assembly (1) .
Fill the cooling system with coolant. Refer to Operation and Maintenance Manual, "Cooling System Coolant (ELC) - Change".
Install the exhaust manifold shields.