CARRIER AS 4361271 - Caterpillar

4361271 CARRIER AS Caterpillar parts

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA4361271
436-1271
4361271

Weight: 180 pounds 81 kg.

Buy CARRIER AS 4361271 Caterpillar genuine, new aftermarket tractor parts with delivery

This part in 1 request: Show. This information for suppliers only!

#1046122 4361271

2023-01-24

Number on catalog scheme: 6

Caterpillar 4361271 Parts scheme CARRIER AS

For full view, you need register

Information:

Illustration 1 g01147004
Schematics for LH and RH (2-Button, Slide, Trigger Switch) JoysticksThis diagnostic code is recorded when the ECM reads the voltage of the circuit for PWM thumb wheel on either joystick as being below normal. The possible causes of this diagnostic code are listed:
The signal circuit for the thumb wheel is shorted to ground.
The thumb wheel has failed.
The ECM has failed. This is unlikely. Note: Other diagnostic codes for the switches on the joystick may occur if the machine configuration is not correct for the installed joysticks. Ensure that the machine configuration is correct.Note: The following test procedure may create other diagnostic codes. Ignore these created diagnostic codes and clear the diagnostic codes when the original diagnostic code has been corrected.Note: Ensure that the diagnostic code of CID 1132 FMI 04 is active before performing this procedure. Test Step 1. CHECK THE PWM THUMB WHEEL
Turn the disconnect switch and the key start switch to the ON position.
Ensure that the diagnostic code is active.
Observe the